This page contains a Flash digital edition of a book.
Ideal & Megger Martindale Test Instruments


Description


Voltage & Continuity Tester IN2102


Multi Voltage Insulation & Continuity Tester. A fully specified insulation tester, with 250, 500 & 1000V test ranges, and is ideal unit for both domestic and industrial installers. The test voltage is indicated on the large backlit LCD display, which includes an analogue arc. A continuity buzzer, auto hold and an automatic zero adjust which removes the resistance of the leads. The test button can also be set to either latching, to give a permanent output, or ‘press to test’. Fully compliant with all UK and International standards, including the 17th Edition. Supplied with unfused test leads with croc clips, batteries, instruction manual and a soft carry case.


IN2103 AC/DC Insulation & Continuity Tester with PI & DAR. Ideal for industrial use, as well as by users involved with the repair and reconditioning of motors. Two key features of this professional tester include polarisation index (PI) and dielectric absorption ratio measurements (DAR). These sophisticated tests, introduced by Martindale for the first time in a handheld instrument, allow for more accurate measurement of insulation values. In addition the IN2103 displays the test voltage on the large backlit LCD display, features an analogue arc, continuity buzzer and continuity buzzer, auto hold and an automatic zero adjust which removes the resistance of the leads. The test button can also be set to either latching, to give a permanent output, or ‘press to test’. Fully compliant with all UK and International standards, including the 17th Edition. Supplied with unfused test leads with croc clips, batteries, instruction manual and a soft carry case.


VI13700/G


Safety Voltage Indicator. Instant, clear indication shows if a circuit is live, its voltage range and whether AC or DC. Tough, moulded construction and long life neons, combined with heavy duty, double insulated cable, large finger guard and a retractable, lockable prod sheath make this the safest, most durable and reliable instrument of its type. The neons strike progressively to indicate the voltage range present, for both DC and ACrms.Easy to use and HRC fuse protected, the voltage indicator range of 50-600V is approved by the Electricity Council, recommendation G9/6. Leads and probes comply with M15/4 and HSE Guidance Note GS38 and BS EN 61010. Fused probe 50-600V AC/DC.


VT3


Non Contact Voltage & Magnetic Field Indicator. Combines a non-contact voltage detector with a magnetic field indicator. Suitable for detection of AC voltages in walls, sockets, cables, circuit breakers and more. With a detection range of 200V - 1000V, this is a handy tool for any electrician, fitting comfortably into your pocket with the aid of a clip. The VT3 is simple to use, and features a red light in the tip which illuminates when AC voltage is detected and a green light that illuminates to show the presence of a magnetic field.


VT2


Non Contact Voltage Indicator. A detector for detection of AC voltages in walls, sockets, cables, circuit breakers and more. With a detection range of 200V - 1000V, this is a handy tool for any electrician, fitting comfortably into your pocket with the aid of a clip. The VT2 is simple to use, and features a red light in the tip which illuminates when AC voltage is detected.


Multi Function Tester 61-255


All In One Multifunction Tester (17th Edition). Fast non-trip loop test. Automatically calculates PFC. Auto RCD mode/ramp test. Selectable Touch Voltage. Insulation at 250/500/1000V. Phase sequence indication. Ultra-lightweight and rugged. Intuitive design. Super bright OLED display. Long battery life.Kit Includes: Switched remote test probe, crocodile clips, padded carry case and calibration certificate.


Multimeter 61-340


TestPro Multimeter. AC/DC voltage & current. Resistance. Audible continuity. Capacitance. Frequency. Temperature. Relative Mode. Backlight. Min/Max. Data hold. Low battery indication. Auto power off.


Voltage & Continuity Tester 61-025


Voltaware Voltage Tester. Indicates presence of voltage from 40-1000VAC. Visual indication of voltage. Selectable audible indication of voltage. Green LED indicates power on. Low Battery indicator. CAT IV - 1000V


Megger Test Instruments Description


Multi Function Tester MFT1710 Multi Function Tester. Two wire non trip loop testing for fast repeatable results. Large bright LCD display showing dual parameters - loop resistance and fault current, insulation resistance and test voltage. Phase rotation indication for verification of rotating machinery. 3-phase RCD testing for industrial applications with no earth. 3-terminal earth test for electrode resistance measurement. On-board data storage and Bluetooth® download.


MFT1720 Multi Function Tester. Offers all the benefits of the MFT1710, plus auto RCD testing, phase rotation, programmable and 3-phase RCD testing and current measurement with the optional clamp.


MFT1730 Multi Function Tester. The most sophisticated of the 17th Edition testers brings Type B RCD testing, 3-pole earth electrode testing to a downloading and rechargeable instrument.


Multimeter AVO310


Backlit Digital Multimeter 1000V AC/DC. Large display characters. Data hold. Min/Max store. IEC 61010 compliant. Auto Ranging function. Rubber Armoured case with stand. Large uncluttered backlit display. Powered by 9V Battery (PP3) with auto Power off. Meets stringent safety requirments: CATIII 600V. Seperate Fuse & Battery compartment enables calibration labels to stay intact!


Ideal Test Instruments Description


Circuit Detection & Location 61-534EU


61-956 61-958


Clamp Meter 61-763


Digital Breaker Finder with GFCI. Automatically indicates the right breaker for quick & easy breaker identification. Works on 120/220V circuits. Non-contact voltage sensor included. Verifies presence of power. Includes GFCI receptacle tester. Verifies proper wiring. Low battery indicator.


SureTest Open/Closed Circuit Tracer. Numeric value and audible signal provide quick and easy-to-understand tracing feedback. Receiver display rotates automatically for easy viewing. Identifies breakers and fuses. Traces wires behind walls. Can be used on de-energised/energised circuits 0-600V AC/DC.


SureTest Open/Closed Circuit Tracer. Same key features as 61-956 but also includes inductive clamp and battery pack.


660AAC TightSight Clamp Meter with TRMS, Capacitance & Frequency. Can be used for a variety of industrial and commercial environments. Unique TightSight bottom display makes hard-to-reach measurements convenient. Easy-to-read displays feature large numbers and green glowing backlight. CAT IV rating for maximum safety. Frequency, capacitance, peak, data hold, max/min.


61-765 61-744


660A AC/DC TightSight Clamp Meter with TRMS, Capacitance & Frequency. Same key features as 61-763


Clamp-Pro 600A Clamp Meter. Measures up to 600AAC. Non-contact voltage indicator (70V - 600VAC). Tapered jaws with hook tip. Auto/manual ranging. Data hold. Auto power off. CAT III - 600V. Low battery indicator.


86


PAT Tester PAT320


Portable Appliance Tester. Simple manual or automatic testing. 230V and 110V operation. Bond testing at 25A,10A and 200mA. Differential, touch and substitute leakage testing. Full colour display. Tests portable RCDs and extension leads. Comes supplied with: tester, carry case, combined earth-bond and insulation test lead & adaptor for testing extension leads.


PAT350


Portable Appliance Tester. Offers all the benefits of the PAT320 but with flash test


Solar Irradiance Meter PVM210


The pocket-size PVM210 is perfect for use on sloping roofs or at the top of ladders because it has the solar detector built in to the top. This is enhanced by its large clear display and hold function. It is used for initially choosing optimum position for a PV installation and for measuring the solar power for the calculation of short circuit current to confirm the performance of the PV panel for certification. On the rear of the meter is a universal camera thread that allowed mounting for precise readings if required, also a protective pouch is included with each instrument. Key Features: Single unit for handed use increasing safety on ladders and roofs. Perfect for measurement of incident light for PV panel short circuit current calculation. Camera mount fixing for accurate placement.


Test Leads & Accessories 6220-740 6220-779 6220-782 6220-827 6231-633


www.wfsenate.co.uk


UK Mains plug leadset 3-Pin 1 wire Test Leads - Standard 3 Wire Test Lead Set 10A Test Lead Set UK Mains Lead


Test and Inspection


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156  |  Page 157  |  Page 158  |  Page 159  |  Page 160  |  Page 161  |  Page 162  |  Page 163  |  Page 164  |  Page 165  |  Page 166  |  Page 167  |  Page 168  |  Page 169  |  Page 170  |  Page 171  |  Page 172  |  Page 173  |  Page 174  |  Page 175  |  Page 176  |  Page 177  |  Page 178  |  Page 179  |  Page 180  |  Page 181  |  Page 182  |  Page 183  |  Page 184  |  Page 185  |  Page 186  |  Page 187  |  Page 188  |  Page 189  |  Page 190  |  Page 191  |  Page 192  |  Page 193  |  Page 194  |  Page 195  |  Page 196  |  Page 197  |  Page 198  |  Page 199  |  Page 200  |  Page 201  |  Page 202  |  Page 203  |  Page 204  |  Page 205  |  Page 206  |  Page 207  |  Page 208  |  Page 209  |  Page 210  |  Page 211