REJUVENATE YOUR FURNACE PRECISION TUNE-UP BY CERTIFIED TECHNICIANS


1. Clean furnace filter 2. Clean and adjust burners


3. Vacuum and brush heat exchanger


4. Test gas valve


5. Test fan and furnace limits for safety


6. Inspect thermocouple or igniter


7. Inspect blower, belts and bearings


8. Inspect heat exchanger for cracks, holes and separations


9. Check motor for reduced wear


10. Measure manifold pressure 11. Measure temperature differential


End Of Season Special Rejuvenate your furnace for


12. Verify thermostat calibration


13. Tighten all wire connections for safety


14. Test for gas and carbon monoxide leaks


15. Lubricate all moving parts if necessary


16. Polish and wash furnace exterior


$89 +Tax www.borderplumbing.com


Valid from February 28 - March 31, 2012


250.862.5199


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16