Wheel Mandrels
1. Ø15mm (For Elma Twin & Unispeed) 3800211000 • To fit Elma Polishing Motors (P1418 P2049)
2. Ø10mm (For Carlo De Georgi)
• Ref: P6118 • £41.35
• To fit Carlo De Georgi Polishing Motors (P5979 & P6030) • 73mm Total Length • Ref: P6484 • £19.95
3. Ø19mm (For Polimax) Left Side
• Bolt on left hand spindle, purposefully made for our range of abrasive wheels (P4581). • Please note that our range of artifex wheels will fit directly onto these spindles. Other wheels, for example Manhattan, silicon and felts etc, will have to be altered by drilling the centre bore size as required.
• Size: Overall Length 185mm • Weight: 600g
• Ref: S34691 • £89.95
£199.50 Was £249.95!
Ref: P5979
Carlo De Georgio, Polishing Motor This month only while stocks last!
• Single Speed- 2800 rpm • 500 Watts • Motor HP 0.50
• Volts 220 (110 upon request) • The ideal workhorse
MORE THAN £50 OFF!
• This polishing machine from Carlo De Georgi comes in single or twin speed units. • This machine is supplied complete with two cone shaped metal tapers (RH and LH thread) and with one wheel centre.
Special Offer
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16