PIP PINS Pip pins are suitable for most applications where quick access is necessary. For use on body panels, engine covers, and nose cones. Other sizes may be available.
PART No: DIAMETER - LENGTH 03201 0407 03201 0409 03201 0410 03201 0411 03201 0413 03201 0415 03201 0419 03201 0421
1/4” - 0.7” 1/4” - 0.9” 1/4” - 1.0” 1/4” - 1.1” 1/4” - 1.3” 1/4” - 1.5” 1/4” - 1.9” 1/4” - 2.1”
03201 0510 5/16” - 1.0” BONNET PINS
PART No: BON PIN BPAB400 BPAG400 BPAR400 BPAS400 BPBA400
BONNET FASTENERS DESCRIPTION
STEEL BONNET PINS BLUE ALLOY GOLD ALLOY RED ALLOY
SILVER ALLOY BLACK ALLOY
GE 62 RUBBER BONNET HOOK, SMALL GE63 RUBBER BONNET HOOK,V LARGE TER CLI TER HOO
TERRYS SPRING CLIP TERRYS HOOKS
PART No: DIAMETER - LENGTH 03201 0516 5/16” - 1.6” 03201 0520 5/16” - 2.0” 03201 0607 03201 0611 03201 0615 03201 0617 03201 0621 03201 0626
3/8” - 0.7” 3/8” - 1.1” 3/8” - 1.5” 3/8” - 1.7” 3/8” - 2.1” 3/8” - 2.6”
03201 0712 7/16” - 1.2”
DETENT RING PINS
(Zinc plated steel pin and pull ring, with stainless steel ball) Ball detent depresses and springs up for quick release applications. Pull ring diameters are 1” as standard. Other sizes available
PART No: DIA / GRIP LENGTH DRI-12 DRI-16 DRI-20 DRI-30 DRI-34 DRI-38 DRI-50 DRI-54 DRI-76
1/4” X 1.0” 1/4” X 2.0” 1/4” X 3.0” 5/16” X 1.0” 5/16” X 2.0” 5/16” X 3.0” 3/8” X 1.0” 3/8” X 2.0” 3/8 X 3.0”
AEROCATCH KITS The new aerodynamically efficient and aesthetically styled Aerocatch is setting new standards in panel fixing. Aerocatch’s characteristics are ideally suited to the motorsport environment, being made from corrosion-free glass-reinforced thermoplastic and being very light in weight. The flush kits mount below the panel and the plush flush kits mount on top of the panel.
AEROCATCH KITS PART No: DESCRIPTION
120-2000 PLUS FLUSH NON LOCKING STD BLACK 120-2100 125-2000 125-2100
PLUS FLUSH LOCKING STD BLACK FLUSH NON-LOCKING STD BLACK FLUSH LOCKING STD BLACK
120-3000 PLUS FLUSH NON LOCKING CARBON LOOK 120-3100 125-3000 125-3100
PLUS FLUSH LOCKING CARBON LOOK FLUSH NON-LOCKING CARBON LOOK FLUSH LOCKING CARBON LOOK
120-2000-01 PLUS FLUSH NON LOCKING IN WHITE 120-2100-01 320--2000 325-2000
PLUS FLUSH LOCKING IN WHITE AEROCATCH 3 PLUS FLUSH AEROCATCH 3 FLUSH
LOCKWIRE PART No:
DESCRIPTION
LWD595 1/2 kg ROLL 0.50mm LOCKWIRE LWD596 1/2 kg ROLL 0.61mm LOCKWIRE LWD597 1/2 kg ROLL 0.80mm LOCKWIRE LWD598 1/2 kg ROLL 1.01mm LOCKWIRE ROB WIR
WIRE TWISTERS 3745 LOCKWIRE BOLT DRILLING JIG 68 69
CLAMPTITE TOOL The Clamptite Tool provides a means of tightening wires wrapped around an object and then locking it in place. The tool can be used with various wire sizes which eliminates space and strength issues often encountered with screw operated worm gear type clamps. Stainless Steel Tool w/Bronze Nut (4 3/4” Long - 7” Fully Extended) Demonstration video on Youtube.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80