Omex has 10 year’s experience in the field of engine management systems and performance electronics. Omex microprocessor based rev limiters and shift lights feature their method of calibration where rev limit or shift point is set independently of the car’s tachometer, eliminating instrument error. Digital timing ensures response within 1 engine revolution. The unit measures 82mm x 40mm x 22mm, is flame-retardant, and has a safety feature which prevents changes from being made while the engine is running. All shift lights are compatible with 2, 4, 6 and 8 cylinder engines, distributorless ignition and CDi systems with a tacho output. For further information on the products below or products not listed, please call Raceparts.
REV LIMITER CLUBMAN This rev limiter provides one of the smoothest engine cuts of any aftermarket system available, featuring user-selectable hard or soft cut. The shift point can be set from 1,000 RPM to 20,000 RPM (2 & 4 cylinder), 12,000 RPM (6 cylinder) and 10,000 RPM (8 cylinder). Not suitable for CDi ignition systems. This system is also available with LAUNCH CONTROL. This is an additional lower rev limit (operated by a push-button) for reducing wheel-spin at the start line. The button is waterproof and it can be mounted on the steering wheel, dashboard or gear knob.
PART No: RLC
RLCT RLCLC DESCRIPTION REV LIMITER CLUBMAN REV LIMITER CLUBMAN TWIN COIL REV LIMITER CLUBMAN WITH LAUNCH CONTROL RLCLCT REV LIMITER CLUBMAN WITH LAUNCH CONTROL, TWIN COIL
SHIFT LIGHT SEQUENTIAL/PRO The SEQUENTIAL system has 4 high-power coloured LEDs in an external unit. The LEDs light incrementally as the shift point is approached, and can be programmed to light at intervals of between 0 and 600 RPM per LED from the shift point. The shift point can be set from 2,000 RPM to 20,000 RPM (2 & 4 cylinder and distributorless ignition systems), 12,000 RPM (6 cylinder) and 10,000 RPM (8 cylinder). The PRO system uses an ultra-bright, dash-mounted LED. The shift point can be set from 1,000 RPM to 20,000 RPM (2 & 4 cylinder and distributorless ignition systems), 12,000 RPM (6 cylinder) and 10,000 RPM (8 cylinder).
PART No: SLS SLP
DESCRIPTION
SHIFT LIGHT SEQUENTIAL SHIFT LIGHT PRO
SPEED SYSTEM The Speed System combines a rev limiter and shift light, and uses an external ultra-bright 10mm LED which can be dash-mounted. The system uses Omex soft-cut technology and operates from 3,000 RPM to 20,000 RPM (2 & 4 cylinder), 12,000 RPM (6 cylinder) and 10,000 RPM (8 cylinder). Not suitable for CDi ignition systems.
PART No: SYS
SYST
DESCRIPTION SPEED SYSTEM
SPEED SYSTEM TWIN COIL
Armtech Motorsport Electronics products use the latest microprocessor technology, giving high reliability and ease of use. Rev limiters and the Speed Shift System are user adjustable to any engine speed up to 54,000 sparks/minute, and are compatible with all 12 volt, negative earth contact breaker systems, optical breaker systems, transistorised and ECU ignition systems. Rev limiters use the Intelligent Misfire System for smooth, safe limiting action. For further information on the products below or products not listed, please call Raceparts.
REV LIMITERS Armtech rev limiters are precisely controlled to provide effective protection against over-revving of performance engines. The unit is easy to install and allows the rev limit speed to be set quickly at any time. The system can be supplied as a coil-mounted kit, or a panel/bulkhead-mounted kit. The rev limiter is also available with the Full Throttle Gear Shift Facility, allowing the driver to change gear without lifting off the throttle (this system is panel-mounted).
SPEED SHIFT The Speed Shift provides Full Throttle Gear Shifts, shift Up (red) and shift Down (green) lights and a rev limiter. The Full Throttle Gear Shift Function allows for engine speed to be precisely maintained and for quicker gear shifts. The system is easy to install and the four functions are simply set up at the touch of a button. This system can be enhanced with a launch control Switch.
HYBRID BATTERY ISOLATOR This product was designed with an emphasis on reliability and high power capacity. The unit is compact, rainproof, shockproof and it can be chassis mounted, so long lengths of high current cable are not necessary. Capacities: 1000 amps instantaneous, 250 amps sustained
SHIFT LIGHT Features an integral, remote mounting ultra-bright light as well as an output driver for any other indicator or 12 volt alarm or buzzer. User adjustable to any engine speed up to 54,000 sparks/minute. The shift speed is quickly set at any time, using one finger and with the engine running at 1/2 shift speed.
LAUNCH CONTROL SWTCH A steering wheel mounted, waterproof push-button switch, providing an extra manual rev limiter to reduce wheel-spin off the start line when used in conjunction with the Speed Shift or a rev limiter.
PART No: 15RL01
DESCRIPTION REV LIMITER COIL MOUNTED
15RL02 REV LIMITER PANEL MOUNTED SINGLE COIL 15RL03 REV LIMITER PANEL MOUNTED TWIN COIL 15RL04 REV LIMITER FULL THROTTLE SINGLE COIL 15RL05 REV LIMITER FULL THROTTLE TWIN COIL 10SS01 10SS02 80LC01 20SL01 70BC06
SPEED SHIFT SINGLE COIL SPEED SHIFT TWIN COIL LAUNCH CONTROL SWITCH SHIFT LIGHT
BATTERY ISOLATOR
61
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80