Other Speakers under consideration for EN54 applications
For more information regarding EN54 and Public Address Equipment, please contact our technical department or visit our website
www.toa.fr
SC-630M (30 W)
Rated Input: 30W Line Voltage: 100V line or 70V line Rated Impedance: 100V line: 330 ohms (30W), 670 ohms (15W), 1k ohm (10W), 2k ohms (5W)/70V line: 170 ohms (30W), 330 ohms (15W), 670 ohms (7.5W), 1k ohm (5W), 2k ohms (2.5W) Sound Pressure Level: 113dB (1W, 1m at 500 to 2,500Hz peak level) Frequency Response: 250–10,000Hz Sensitivity (0dB = 1mW/10 dynes/cm2): –20dB at 1kHz (when used as Microphone) Dust/Water Protection: IP65 Polarity: Hot: Black, Com: White Operating Temperature: –20°C to +55°C (must be free from dew condensation) Finish: Horn flare; Aluminum, off-white, powder coating/Reflector horn and rear cover; ABS resin, off-white/Bracket, Screws and bolts; Stainless steel/Speaker cable; Polyvinyl chloride insulated cabtyre cable (6mm in diameter, 600mm in length) Dimensions: 285 (W) × 227 (H) × 277 (D)mm Weight: 2kg
F-2000 (60 W)
Enclosure Type: Bass-reflex type Rated Input: 60W Rated Impedance: 8 ohms/ 100V line: 170 ohms (60W), 330 ohms (30W), 670 ohms (15W), 3.3 k ohms (3W)/ Sensitivity (1W, 1m): 92 dB at installation in 1/2 free sound field/93 dB at installation in 1/2 free sound field (with horn adapter) Frequency Response: 65 – 20,000 Hz, -10 dB at installa- tion in 1/2 free sound field Crossover Frequency: 2.5 kHz Directivity Angle: Horizontal: 110°, Vertical: 100°/ Horizontal: 80°, Vertical: 80° (with horn adapter) Speaker Component: Low frequency: 20 cm (8") cone-type High frequency: 25 mm (1") dome tweeter Input Terminal: Push-in terminal Finish: F-2000BT: Enclosure: HIPS resin, black/ Punched net: Surface-treated steel plate, black, paint/ Joint bracket, wall bracket: Steel plate, t1.6, black, paint Speaker bracket: Die-cast aluminum, black, paint F-2000WT: Enclosure: HIPS resin, white/ Punched net: Surface-treated steel plate, white, paint/ Joint bracket, wall bracket: Steel plate, t1.6, white, paint Speaker bracket: Die-cast aluminum, white, paint Dimensions: 244 (W) × 373 (H) × 235 (D) mm Weight: 7.4kg (including the supplied brackets) Recommended Subwoofer: FB-100, FB-120B/W
F-2352SC (6 W)
Rated Input: 6W (high impedance) Power Handling Capacity: Continuous pink noise; 9W (8 ohms), 6W (16 ohms)/Continuous program; 18W (8 ohms), 12W (16 ohms) Impedance:100V line; 1.7k ohms (6W), 3.3k ohms (3W), 10k ohms (1W), 20k ohms (0.5W)/70V line; 830 ohms (6W), 1.7k ohms (3W), 3.3k ohms (1.5W), 10k ohms (0.5W), 20k ohms (0.25W)/25V line; 830 ohms (0.75W), 1.7k ohms (0.4W), 3.3k ohms (0.2W), 10k ohms (0.06W), 20k ohms (0.03W)/Low (adjustable); 16 ohms, 8 ohms Sensitivity (1W, 1m): 89dB Frequency Response: 80 – 20,000Hz (–10dB), 50 – 20,000Hz (–20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) Speaker Component: High frequency; Balanced dome-type/Low frequency; 12cm cone-type Mounting Hole: ø200 (maximum ceiling thickness; 37mm) Input Terminal: Push-in connector (Bridging terminal-2 branch type)
F-2852C (60 W)
Enclosure: Bass reflex type Rated Input: 60W (high impedance) Power Handling Capacity: Continuous pink noise; 90W (8 ohms), 60W (16 ohms)/Continuous program; 180W (8 ohms), 120W (16 ohms) Impedance: 100V line; 170 ohms (60W), 330 ohms (30W), 670 ohms (15W), 3.3k ohms (3W)/70V line; 83 ohms (60W), 170 ohms (30W), 330 ohms (15W), 670 ohms (7.5W), 3.3k ohms (1.5W)/25V line; 83 ohms (7.5W), 170 ohms (3.7W), 330 ohms (1.9W), 670 ohms (0.9W), 3.3k ohms (0.2W)/Low (adjustable); 16 ohms, 8 ohms Sensitivity (1W, 1m): 91dB Frequency Response: 60 – 20,000Hz (–10dB), 45 – 20,000Hz (– 20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) Speaker Component: High frequency; Dome-type/Low frequency; 16cm cone-type
F-122C (30 W)
Enclosure: Bass reflex type Rated Input: 30W (high impedance) Power Handling Capacity: Continuous pink noise; 60W (8 ohms), 30W (16 ohms)/Continuous program; 120W (8 ohms), 60W (16 ohms) Impedance: 100V line; 330 ohms (30W), 1k ohm (10W), 3.3k ohms (3W), 10k ohms (1W)/70V line; 170 ohms (30W), 330 ohms (15W), 1k ohm (5W), 3.3k ohms (1.5W), 10k ohms (0.5W)/25V line; 170 ohms (3.7W), 330 ohms (1.9W), 1k ohm (0.6W), 3.3k ohms (0.2W), 10k ohms (0.06W)/Low (adjustable); 16 ohms, 8 ohms Sensitivity (1W, 1m): 90dB Frequency Response: 70 – 20,000Hz (–10dB), 50 –20,000Hz (–20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) Speaker Component: 12cm cone-type
Rated Input: 30W Rated Impedance: 100 V line; 330 ohms (30W), 500 ohms (20W), 1k ohm (10W)/70 V line; 170 ohms (30W), 330 ohms (15W), 500 ohms (10W), 1k ohm (5W) Sensitivity (1W, 1m): 98dB Frequency Response: 120 –15,000Hz Speaker Component: 12cm cone-type Horizontal Directivity: Constant directivity horn 90° (± 45° horizontal from front axis)/Over 93dB (1W, 1m), 3kHz at ± 45° Speaker Cord: 2-core cabtyre cable with diameter of 6mm Operating Temperature: –20°C to +55°C Dust/Water Protection 2: IP65 Finish: Horn, cover; ABS resin, off-white, paint/ Bracket; Stainless steel/Net; Aluminum, gray, paint/ Screw; Stainless steel Dimensions: 366 (W) × 230 (H) × 272 (D)mm Weight: 3.1kg
CS-304 (30 W) F-1300 (30 W)
Enclosure Type: Bass-reflex type Rated Input: 30W Rated Impedance: 8 ohms/ 100V line: 330 ohms (30W), 1 k ohms (10W), 3.3 k ohms (3W), 10 k ohms (1W) Sensitivity (1W, 1m): 90dB at installation in 1/2 free sound field Frequency Response: 80 – 20,000Hz, -10dB at installation in 1/2 free sound field Crossover Frequency: 2 kHz Directivity Angle: Horizontal: 110°, Vertical: 100° Speaker Component: Low frequency: 13 cm (5") cone-type/ High frequency: Balanced dome tweeter Input Terminal: Push-in terminal Finish: F-1300BT: Enclosure: HIPS resin, black/ Punched net: Surface-treated steel plate, black, paint/ Joint bracket, wall bracket: Steel plate, t1.6, black, paint Speaker bracket: Die-cast aluminum, black, paint F-1300WT: Enclosure: HIPS resin, white/ Punched net: Surface-treated steel plate, white, paint/ Joint bracket, wall bracket: Steel plate, t1.6, white, paint Speaker bracket: Die-cast aluminum, white, paint Dimensions: 162 (W) × 250 (H) 161 (D) mm Weight: 3.6kg (including the supplied brackets) Recommended Subwoofer: HB-1, FB-100
Usable Cable: 600V Vinyl-insulated cable (IV wire or HIV wire)/ Solid copper wire; ø0.8 – ø1.6mm (equivalent to AWG No.20 – 15)/ 7-core twisted copper wire; 0.75 – 1.25mm2 (equivalent to AWG No.18 – 17) Finish: Baffle; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black/Rim; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint/Punched net; Steel plate, white, paint/Dust-proof bag; Artificial fiber, black Dimensions: ø230 × 154 (D)mm Weight: 1.5kg (including panel) Accessory: Panel × 1, Paper pattern × 1 Option: Back can; HY-BC1, Reinforcement ring; HY-RR2, Anchor hanging bracket; HY-AH1 (HY-RR2 required), Tile bar bridge; HY-TB1 (HY-RR2 required), Trim ring; HY-TR1 (HY-RR2 required)
Mounting Hole: ø250mm (maximum ceiling thickness; 37mm) Input Terminal: Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) Usable Cable: Solid copper wire; ø0.5 – ø1.6mm (equivalent to AWG No. 24 – 14)/Stranded copper wire; 0.2 – 2.5mm2 (equivalent to AWG No. 24 – 14) Finish: Enclosure; Steel plate, plating/Baffle; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black/Rim; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint/Punched net; Steel plate, white, paint Dimensions: ø280 × 227 (D)mm Weight: 5.1kg (including mounting accessories) Accessory: Panel × 1, Ceiling reinforcement ring × 1, S afety wire × 1, Paper pattern × 1 Option: Anchor hanging bracket: HY-AH1, Tile bar bridge: HY-TB1
Mounting Hole: ø200 (maximum ceiling thickness; 37mm) Input Terminal: Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) Usable Cable: Solid copper wire; ø0.5 – ø1.6mm (equivalent to AWG No. 24 – 14)/Stranded copper wire; 0.2 – 2.5mm2 (equivalent to AWG No. 24 – 14) Finish: Enclosure; Steel plate, plating/Baffle; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black/Rim; Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint/Punched net; Steel plate, white, paint Dimensions: ø230 × 229 (D)mm Weight: 3.7kg (including mounting accessories) Accessory: Panel × 1, Ceiling reinforcement ring × 1, Safety wire × 1, Paper pattern × 1 Option: Anchor hanging bracket: HY-AH1, Back can: HY-BC1, Tile bar bridge: HY-TB1/Trim ring; HY-TR1
62
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64