POLYCARBONATE EXTRUSIONS | GROWER SELECT Aluminum 8mm Polycarbonate Extrusions
U-Profile 8mm Available in sections, it is used as a perimeter cap on sidewalls and gables and is used in conjunction with our H-profile. Fasten to the structures (on sidewalls and gable ends) with wood screws or self-tapping tek screws.
Item # Description 38-0805A GS 8MM U-Profi le 12' Aluminum H-Profile 8mm
Available in sections, it's used to splice the panels on sidewalls and gables and is used in conjunction with our U-profile. Fasten to structure with wood
screws or self tapping tek screws. Item #
Description 38-0800A GS 8MM Double Splice 12' End Cap 8mm
Available in 24' sections, it's used for top, bottom, and side closure in roof applications in conjunction with the Bar Base and Bar Cap. Fasten to the structure with wood screws or standard tek screws. When
used as a base, weep holes should be drilled every 12” to allow the condensate to drain.
Item #
38-0420 38-0422
Description
GS 12' End Cap Aluminum GS 20' End Cap Aluminum
Universal Gable Extrusions
Universal extrusions not only hold roof poly, they also cap off polycarbonate or wood gable ends.
Item # Description
30-0114 GS 17' Universal Gable Extrusions 30-0113 GS 19' Universal Gable Extrusions 30-0112 GS 23' Universal Gable Extrusions 30-0104 GS 27' Universal Gable Extrusions
Price
$68.45 $53.79 $78.36 $88.12
Aluminum tape Washer Tek screws Price
$14.18 $23.64
Price $8.83 Item # 45-1200
MISCELLANEOUS SUPPLIES Description
98-1541 #10 x 1 1/2" Wood screw #12 x 3/4" Tek Screw
26-1103 #12 x 1 1/2" Tek Screw
38-0245 1 1/8" Neoprene Backed Washer 26-0823 Foil Tape 1" x 150'
47-9964 Aluminum Vent Tape 2" x 150' 26-1962 Vertical Closure Strip 36" 26-0812 Horizontal Closure Strip 39"
Price $6.66 Bar Cap 8mm
Available in 24' sections, it's used to fasten down the polycarbonate once it's been installed within the Bar Base framework. 1/2" cap screws should be used to secure it to the bar base every 12".
Bar Base 8mm
Available in 24' sections, it's used in conjunction with our Bar Cap to splice panels over bows or span purlins with a maximum recommended span of 4' x 6'. Fasten to the structure with wood screws or standard tek screws.
Item #
38-0412 98-1540
Description
38-0408 GS 8 MM Bar Cap 24' GS 8 MM Bar Base 24' #10 x 1/2" Bar Cap Screw
Price
$24.87 $47.56 $0.09
Price
$0.13 $0.05 $0.06 $0.19
$27.16 $26.25 $1.18 $0.82
38
Prices and availability may vary by location. Prices are subject to change without notice. Minimum quantities may apply
Prices and availability may vary by location. Prices are subject to change without notice. Minimum quantities may apply.
COVERINGS
BFG Supply Co. (800) 883-0234 | Toll Free Fax: (800) 645-6126 |
www.bfgsupply.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19