in the future and it also enables us to check for any parts that are wearing out.” The checks he refers to include the
distance the motors have travelled in hours, and the number of dots the heads have shot. If the machine does require a replacement part, VTS customers also benefit in that where many companies insist the customer has to have a new part to get the warranty.VTS. If the print quality is acceptable, VTS will note that a part, or parts, have exceeded their life expectancy, and will only replace them when it affects the quality of the print. When the time
VTS Engineers are hand-picked and have years of experience.
comes to change a part, only the cost of that part is charged. “In addition, as we only specialise in these two brands, Roland
and Uniform, when our Engineers visit our customers they have virtually every part that’s likely to be needed so achieve a first call fix. These are just some of the ways that we’re offering customers the best possible service,” says Brian. As to the current economic climate, he believes it is bringing more customers to VTS. “With the recession, many people are trying to keep their printers
going rather than buying new machines,” Brian says. “And they are saving even more money by choosing our warranty and service contracts. For example, customers going into their third year of warranty on a Roland VP-540 with VTS have saved about £2,400 compared to the extended warranties offered by the manufacturer.” But the lure of those shiny new printers are tempting.
Brian spoke about a signmaker in Leicester who approached him for advice as to what machine he should buy now the lease on his VP-540 was coming to its end. It transpired that his current printer was doing everything the chap wanted and there were no problems so Brian suggested that rather than spend unnecessarily, the signmaker should opt for a VTS warranty and look forward to getting perhaps another 10 years out of his existing equipment.
“Printers nowadays are very expensive but in this throwaway
society some people still want to replace machinery and get rid of the old. But they can be refurbished and still be excellent machines. With the right care and attention old machines can be brought back to virtually new,” says Brian Keeping your existing printer and extending its warranty or
buying a refurbished machine seems very appealing from a finance point of view; but all the marketing by printer manufacturers says that technology is making vast improvements and machines are getting better and faster all the time, so what’s the truth? “There isn’t that much difference with the new machines,” says
Brian. “They may be marginally quicker and improve some problems with banding, etc, but in reality a lot of large format printing is displayed from a distance. It really doesn't matter that it isn't perfect when viewed close up. The printers many signmakers have now are so good that any improvements can only be marginal. Pure print speed isn't really such a big issue for most people anyway, and that’s something heavily promoted in the marketing of new machines.” The more the conversation continues, the more obvious it is that
there is a real depth of knowledge at VTS. While acknowledging the need to keep costs down, there are limits to what can be done. Despite being able to buy refillable cartridges and third party inks to refill them, this isn’t something VTS recommends. “Buying a cartridge is far better, whatever ink you
use,” Kevin advised. “The cartridges are made in a clinical, dust-free atmosphere. Often signmakers are working in dusty environments and filling up ink cartridges using a funnel that may have been used for other inks, or may have a layer of dust on them, which is not a good practice. It only takes a single speck of dust to block an ink head, which has holes about a quarter of the width of a human hair. Many people refill cartridges to save money but it is a false economy. The heads tend to require more regular cleaning and we reckon that using a third party ink typically knocks off about 20 per cent off the life of the heads.” As to the future of print and possible alternatives,
Peter believes there will be more and more thin films technology having an impact over the next five to 10 years. So, instead of applying printed films to a substrate, a thin film screen with a little wireless chip in the back will be used instead. Whether he’s correct or not, time will tell, but the
All machines undergo comprehensive checks and have a thorough service prior to a warranty being issued.
team at VTS has certainly got it right now, judging by the 99 per cent of customers who extend their warranties year on year and enjoy discounts as a result. Further details and prices are available at
www.vts-service.co.uk or by telephoning 01395 442652.
ISSUE 132 NOVEMBER/DECEMBER 2011 Sign Update 59
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116