All boards available at 1656 Walter St., Suite F, Ventura (805) 642-SURF (7873) •
www.homegrownsurfshop.com
Resist Surfboards The Bandit
The Producer: When Chad Eastman asked me to design this board I named it the “thick, wide, and ugly” but after immediate positive feedback, we had to rename it. The Producer produces excellent results in typical Southern California summer waves. The board is ordered a little thicker, a little wider, and a little uglier than your standard shortboard. Personally, as a shaper, I’ve never been a fan of boards that have thicker rail volume at the nose twelve inch mark, but after seeing what this board has been producing this summer, I’m a believer that these modern 80’s style boards definitely have a place in todays quiver.
Shaped by Jeff Hull
Resist Surfboards The Producer
When summer is over and Ventura County lights up, the Bandit is your go to board. Slight single to double concave bottom contours have been fine tuned for the waves we’re known for. It’s the model I designed for Taylor Curran to be ridden daily at Strand when its pumping in the winter time. Since making this model we’ve done stretched out variations of step up boards to mini guns and have received excellent feedback from surf trips around the world. The board can be ordered in your standard shortboard size on up to a foot bigger for mini guns. When the conditions turn epic, this is the board you wish you had.
Shaped by Jeff Hull
A. Wright Surfboards
Dimensions: 5’7’’ x 17 3/4” x 1 3/4”
Designed for Nate Smithson, 14, as a high performance shred-sled for Ventura County conditions.
Shaped by Aaron Wright
A. Wright Surfboards
Dimensions: 6’1’’ x 19 x 2 1/4”
Epoxy construction gives a lightweight feel for a bigger, high-performance riders.
Shaped by Aaron Wright
Parole Surfboards
E.T. HP Model Dimensions: 9’0” x 18” x 22” x 14 1/4” x 2 1/2”
EPS/Epoxy
Great all-around longboard. Single to double concave flat “v” out the tail. Available as 2+1 PR quad fin set up.
Shaped by John Birges
Parole Surfboards Pancho Fish
Dimensions: 5’3” x 17 1/2” x 19 1/2” x 16” x 2 1/4”
Retro 70’s style
Super fast, super fun, great small wave board with very low rocker. It will spiral you out the back.
Shaped by John Birges
Thor Surfboards S.S. Fish
Dimensions: 5’10” x 19 3/4” x 2 3/8”
The SS Fish is a fun summer board for all wave conditions. This model should be ridden 4” to 6” shorter and 1” wider then a standard shortboard.
Shaped by Thor
Thor Surfboards The Fishy Fish
Dimensions: 5’8” x 20” x 2 1/2”
The Fishy Fish will make even the smallest waves fun. This model should be ridden 6” to 8” shorter and 2” wider then a standard shortboard.
Shaped by Thor
30 DEEP SURF MAGAZINE July/August 2011
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60