IPC 9850 Attribute Defect Rate Kit
IPC 9850 Kit Attribute Defect Rate Kit checks out pick and place machines.
IPC-9850 includes test methods for determining various SMT placement equipment attributes, including repeatability, accuracy and attribute de- fects. Each of these tests requires specific material and this new test board and kit from Practical Components provides the solution for conducting the attribute rate defect testing. The applicable section from IPC-9850 is 4.1, where attribute defects are defined as components placed upside down, tombstoned, on side, missing or extra part, damaged lead(s), dam- aged part(s), completely off land, or wrong polarity. Testing requires the placement of 88,000 components on 20 boards to attain reasonably accu- rate test results. Practical Components 9850 Kit will provide you with enough components and boards to meet this guideline. While IPC-9850 requires the placement of components on sticky tape (included), these boards can also be printed with solder paste and reflowed.
Each board contains the lands (multiple orientations) for 4,400 components (440 SOT23s, 440 SO8s, 880 0603SMCs, 880 0603 SMRs, 880 0402SMCs and 880 0402SMRs). Test material is available from Practical as single boards or complete kits with all the necessary dummy components. On request, this board comes with demonstration versions of CircuitCAM and CheckPoint manufacturing soft- ware, ready-to-run CircuitCAM Project Files (CPFs) and Gerber and X, Y Theta data at no extra charge.
IPC Compliant PCB014 Board
PC014 Kit (IPC 9850)
Part Description SOT23-TR
SO8GTR-3.8mm 0402SMC-PA 0402SMR-PA 0603SMC-PA 0603SMR-PA Sticky Tape PCB014
Kit Order Number: Notes
Quantity Per 5 Kits
3,000 2,500
10,000 10,000 8,000 5,000 1 Roll 5
PC014-0-05
Gerber Data and X, Y Theta Data are available, if required, at no charge. Digitized files provided by Aegis Software included at no charge.
Practical Components, Inc. Tel: 1-714-252-0010 Fax: 1-714-252-0026 105
Quantity Per 10 Kits
6,000 5,000
10,000 10,000 12,000 10,000 2 Rolls 10
PC014-0-10
Board size: 11" x 11", .062" thick. High Temp 170Tg board material. Standard board finish is HASL.
Quantity Per 20 Kits
12,000 10,000 20,000 20,000 20,000 20,000 3 Rolls 20
PC014-0-20
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124