This page contains a Flash digital edition of a book.
Features and Benefits

 A bench mounted draft free combustion chamber with a large inside volume of 1.0m3 and exhaust fan to enable simple evacuation of combustion products.

 Large sliding window made from heat resistant ceramic glass giving a generous view of the specimen during a test. An interior light is also fitted.

 Specimen holders  Fully adjustable horizontal and vertical specimen supports.

 A burner in compliance with ASTM D 5025, with simple angle adjustment (0°, 20°, 45°) and precision gas control system including gas flow meters, pressure regulator and pressure gauge (manometer).

 Two access ports enabling easy entry to the chamber for movement of the burner and specimen.

 A burner wing tip.  Three digital test duration timers for accurate but simplified operation with remote handset.

Technical Specification -Test Chamber Measuring principle

External dimensions Internal dimensions Internal volume Exhaust

Flammability of plastic materials subject to direct impingement of flame

1.47m (L) x 0.74m (D) x 1.3m (H) 1.4m (L) x 0.6m (D) x 1.2m (H) 1m3

Self-starting industrial frame size extraction fan with over temperature/current protection. Low noise metal frame and metal impeller meet UL94V-0. Outer diameter of exhaust chimney = 100mm

Exhaust flow rate Interior light

Digital timers (3pcs) 19 l/s

610mm fluorescent, 240VAC 50/60Hz or 110V 50/60Hz (specify at time of order)

8 digit battery powered panel mount programmable timer with 10 timer ranges and 9mm high reflective LCD display. Replaceable internal battery lithium battery provides up to 7 years unit uninterrupted operation.

Burner and Gas Control System Burner

Burner wing tip Burner mounting fixtures Gas flow meter Manometer Safety precaution

Horizontal Burning Test

Horizontal Burning Foamed Material Test

A burner in compliance with ASTM D 5025

Dimensions of slit 48 ± 1mm in length by 1.3 ± 0.05mm in width.Used for the test procedure in Horizontal Burning Foamed MaterialTest.

Simple angle adjustment (0°, 20°, 45° available) from the vertical axis

Flow adjustment valves and flowmeters, 0.1-1.7l/min & 10-300cm3

/min CH4 0-200mmH2 O Flash back arrestor Vertical Burning Test

Page 1  |  Page 2  |  Page 3  |  Page 4