“The average street sweeper travels five to seven mph. When a sweeper is placed in an environment where cars are traveling 70 mph, the risk of an accident is very high. As an
owner or operator of a street sweeper, it is imperative that safety is the first priority.
Also an issue with highway sweeping is having the ability to offload debris easily. Products Manager for Elgin, Brian Giles recommends a high dump machine for jobs on the highway. Most of the time, highway state run organizations like DOTs and turnpikes buy trucks exclusively for highway sweeping and don’t even buy trucks for slow routes. “They need the ability to get the big, ugly debris,” Giles says. Giles also recommends a mechanical sweeper with a high dump. He recommends a conveyer belt mechanism versus a squeegee conveyer, but says, “We manufacture both.”
Strandlund mirrors Giles recommendation and says, “For highway sweeping, you need a truck-mounted, four-wheeled sweeper such as the Python S3000. It is ultra-powerful and has a large capacity hopper.” In their product line, they also have a sweeper called the Harvester, and it continuously dumps into a truck that is driving in front of it, meaning that it never has to stop sweeping to dump. Strandlund believes the Harvester to be the best answer to highway sweeping.
”
car parts, Elgin uses the expressway as a testing ground for their sweeper trucks to develop and, in turn, manufacture the best equipment for the job of highway sweeping.
If not using one of these trucks that can handle picking up the big debris, the result is people going out onto the highway— on foot—and physically picking it up by hand. “It’s totally dangerous,” Giles says. Hence, his motto. Typically, a plow truck with an absorber is supposed to follow behind when people are out there picking up debris, and Giles has even received requests to get an absorber put on the back of a sweeper truck, an impossibility since there’s already a brush back there. Also adding an absorber, unfortunately, would prove out of the question.
Giles says, “The whole process is a hazard.” A truck with an absorber should be following behind a sweeper truck, as well, and not just when people are on foot. Giles thinks a lot of lighting and dust control would be helpful to the process. “People run into a dust cloud and then they don’t see the sweeper. Even with a lot of lights, operators should have a follow truck,” he advises.
Hendrickson agrees that safety is a major concern when street sweeping is taking place in any setting, be it a fast moving six lane highway, or a One-Way city street. The average street sweeper travels five to seven mph. When a sweeper is placed in an environment where cars are traveling 70 mph, the risk of an accident is very high. Hendrickson says, “As an owner or operator of a street sweeper, it is imperative that safety is the first priority. A clean road means nothing if someone is hurt in the process.” A well-trained operator is the first line of protection against the risk. Second is a well lit sweeper. “The more lights, the better,” he says. On highway jobs, it is not uncommon for the sweeper to be followed by a second truck that has a crash attenuator attached. The attenuator not only provides an extra line of caution for a passing driver, but it also lessens the impact in the event that a crash should occur.
Giles follows the motto, “Have as few people out of the truck and out on the road as possible.” Highway sweeping is loaded with hazards. The entire concept of sweeping debris on a highway is hazardous. Elgin Street Sweepers work toward making the process as safe and hazard free as possible, and they employ the Dan Ryan Test to do so. A test of Elgin’s own making, the Dan Ryan Test is performed on the Dan Ryan Expressway, which runs from the South Side of Chicago to the downtown loop of the city. Trucks bringing in anything on the North American continent from East to West use the Dan Ryan Expressway, and, knowing the importance of having a sweeper that gets up retreads and
24 NORTH AMERICAN SWEEPER
Giles thinks the amount of debris that piles up along the highway could be prevented, which would have a positive impact on employee safety, as well. Who is responsible for sweeping a highway project could either be the state DOT, or, depending on the highway, the city the highway passes through. City jobs are commonly maintained by the city themselves, however, who is sweeping the project could also mean a contractor. In this case, the DOT or city will typically specify their requirements to the contractor for the work to be completed. He says, “If sweepers got their frequency a little higher, they wouldn’t have to sweep as much. Maybe it could minimize putting people out on the road and out of harm’s way,” Giles says.
Story by Megan McClure MAY 2011
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32