Care of your Riva Studio


To help you get the best performance from your fire and keep it in good condition, inside and out, Stovax offers a wide range of cleaning and maintenance products. Stovax also supply a wide variety of fireplace accessories and flue pipe. Your Stovax retailer will be able to give you full details or you may view the complete range at www.stovax.com.


Warm Air Ducting kit


The kit, for the cassettes only, which includes two 3 metre lengths of flexible ducting, allows you to heat up to two other living spaces. The Riva Studio 3 has four ports so you can even add two kits if required, providing heat for up to four additional rooms.


A REMOVE ALL BURRS AND SHARP EDGES DO NOT SCALE 1 1 Edge Kit Installation method for: 10˚ Angled Flue Outlet 2


This optional flue outlet for the Riva Studio Cassettes offers greater installation flexibility and ease, especially in larger openings with deeper lintels.


3 4 5 Product Guarantee 6


All Riva Studio fires are guaranteed for 2 years from the date of purchase. However, this is dependent upon servicing the appliance 12 months after installation and specifically excludes ‘wear and tear’ items, such as glass, firebricks, grate parts, log retainers, baffles and rope seal. The use of petrocoke in a Riva Studio will invalidate its guarantee.


7 A B C D E 20/07/2009 NO.DATE F REVISION


Stovax pursue a policy of continuous product improvement, therefore, whilst our products are correct at the time of the photography, we reserve the right to make alterations and amendments. Exact product details should be discussed with your retailer at the time of purchase.


G


All fire and flame photography has been taken from genuine products, however, the exact appearance of the flame picture for any appliance will vary depending on the nature of the flue type, installation surroundings, local geographical features and the way in which the appliance is operated.


Large Image: Riva Studio 3 Frameless Edge shown with Stovax Kappa 67.1 x 33.3cm Fireplace Tile Surround 6


TOLERANCES UNLESS STATED NO DECIMAL PLACE 1 DECIMAL PLACE 2 DECIMAL PLACES ANGLES


+/- 1 o ALL DIMENSIONS ARE IN MM


C COPYRIGHT BY STOVAX LTD THIS DRAWING AND ALL DESIGNS


INCORPORATED WITHIN IT ARE THE PROPERTY OF STOVAX AND MUST NOT BE COPIED OR RELAYED TO OTHERS WITHOUT PERMISSION.


H 7 FINISH


† 34mm Studio 1 & 2 / 44.5mm Studio 3 I


DRG NO.


J SHT 1 OF 1A2 DRAWN +/- 0.5mm


CHECKED MATERIAL


shor


NB: When using the Edge Kit, heat resistant board and high temperature finishing plaster must be used. Please refer to installation instructions for full details of both kits which can be downloaded from www.stovax.com


WEIGHT Link?: DATE SCALE TITLE 20/07/2009 EXETER DEVON ENGLAND Fireplace Tile Surrounds


A unique collection of 22 ceramic and natural stone tiles designed to complement your Stovax stove or fireplace. To request a brochure, simply contact your local retailer or visit www.stovax.com.


35


Studwork or false chimney breast


2


Convected heat flows directly out into room


3


Brick or masonary chimney breast


Convected heat flows directly out into room


Cool Wall Kit Installation method for:


Studwork or false chimney breast


Convected heat flows up through an open channel and must be


vented back into room at a higher point


4


Brick or masonary chimney breast


Convected heat flows up through an open channel and must be


vented back into room at a higher point


B C D E F G H I


Edge and Cool Wall Kits


Edge Kit (cassette fires only) This kit is screw-mounted to the front flange of the outer firebox. The L-shaped attachments provide a 34/44.5mm†


return against which high temperature plasterboard/screed can be butted up for the ‘clean edge’ look. The Edge Kit is made in aluminised steel which can then be painted to match the decor of your room.


Cool Wall Kit (cassette fires only) Again, screw-mounted to the front flange of the outer firebox, the U-shaped attachments of the Cool Wall kit are designed primarily for studwork false chimney breasts. The additional depth allows some of the heat to be vented up into the void above the firebox and then re-enter the room at a higher level. The effect is to produce a cooler wall immediately above the appliance than would otherwise be the case. The Cool Wall Kit is made in aluminised steel which can then be painted to match the decor of your room.


PART FILE : STUDIO 10 deg SETTING studio 2.asm SAVED AS :


J STUDIO 10 deg SETTING studio 2.dft


5


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36