Rolled Rings, Segments & Specials


Ring slide segments of unlimited radius can be supplied to customers special requirements. Segments can be gearcut and butted together to create


very large diameter rings. Further information is available online at www.bwc.com/products/hdrt.html.


Ring slides and segments can be supplied with a wider gear face and/or larger gear teeth.


Related Products


HDRT combines the flexibility and function of the PRT2 ring track system with the size and strength of the HepcoMotion HDS2 heavy duty slide system. HDRT has a large range of precision ground single edge V ring slides with high load capacity. There is also a track system combining double edge V ring segments and HD linear slides. For more details and catalog visit www.bwc.com/products/hdrt.html


• High load capacity up to 60kN


• 7 sizes of ring from 512 to 1656mm diameter with internal or external V • Double edged V rings


• Track systems: limitless variety of open and closed circuits • Stainless steel option


• Gearcut ring option with matching pinions


• Ø64, Ø95 & Ø120 bearings designed for ease of installation and setting • Full range of fixed center and bogie type carriages


Using the HepcoMotion PRT2 ring slides and track system as its basis, the DTS is a fully assembled unit ready to be incorporated into the customer's machine or framework. Carriages are driven around an oval or rectangular track with continuous or intermittent (indexing) motion. The belt driven carriages are rigidly guided along the precision track thus maintaining accurate alignment and resistance to deflection. For more details and catalog visit www.bwc.com/products/dts.html


• Two sizes based on the PRT2 Track System size 25 and 44 • Oval or rectangular circuit format options • Direct load capacity up to 4000N per carriage


• Carriage locking system for accurate repeatable positioning • Mounts directly to HepcoMotion MCS Machine Construction System • Ingenious safety trip latch mechanism disengages drive if carriage is impeded • AC geared motor and gearbox options available


61


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64