This page contains a Flash digital edition of a book.
Technical Specifications


Ring Slides and Segments Material and finish:


Standard version: High carbon steel, hardened on V faces. Ground on all main surfaces to N5 finish. Stainless steel version: Special martensitic stainless steel generally conforming to 420 series, hardened on V faces. Ground on all main surfaces to N5 finish, other faces polished.


Track System Slides Material and finish:


Standard version: High carbon-chromium steel, hardened on V faces. Ground on all main surfaces to N5 finish, other faces chemically blacked. Stainless steel version: Special martensitic stainless steel generally conforming to 420 series, hardened on V faces. Ground on all main surfaces to N5 finish.


Bearings Bearing rings, balls, rollers:


Shields: Seals:


Cages: Studs:


Temperature range:


Carriage Plates Material:


Finish:


Lubricators Material:


Fixings:


Temperature range: Lubricant:


Pinions


Material and finish (


Friction


Coefficient of friction for lubricated systems is typically 0.02. Lubricators will add between 0.5 (for LB12) & 2N (for LB54) each.


Maximum Speed


Generally 1m/s for dry (unlubricated) operation and 5m/s when lubricated. Greater speeds may be possible at reduced loads. Contact Bishop-Wisecarver for details.


Stainless steel only version: 300 series stainless steel, finish as gearcut. ISO 1328 accuracy grade 10.


Standard version: Case hardened carburizing steel. Ground on teeth to N5 finish. ISO 1328 accuracy grade 6. Stainless steel version: Hardened 420 series stainless steel. Ground on teeth and all main surfaces to N5 finish. ISO 1328 accuracy grade 6.


Pinions 53


Standard version: Carbon-chromium bearing steel AISI 52100 hardened and tempered. Stainless steel version: AISI 440C stainless bearing steel, hardened and tempered.


Standard version only: Steel with bright zinc plated finish. Nitrile rubber.


Plastic (metal for floating bearing).


Standard version: High tensile steel with chemical black finish. Stainless steel version: AISI 303 series stainless steel.


All versions: -20°C to +120°C. Bearings for low temperature, high temperature and vacuum use are available on request.


All versions: High strength aluminum alloy


Standard version: Clear anodized. Stainless version: Special finish approved by US Department of Agriculture for food use. Stainless steel carriage plates available on request.


Impact resistant thermoplastic with felt wiper. Stainless steel. -20°C to +60°C.


Slideway oil with viscosity 68 cSt or similar.


Lubricators 37


Carriages 38-39


Bearings 34-36


Ring slides 26-33


Track slides & segments


42-46


59


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64
Produced with Yudu - www.yudu.com