This page contains a Flash digital edition of a book.
System Composition


HepcoMotion bearings are available in a range of 5 useful sizes and various formats to suit most design requirements. The special raceway conformity and low radial clearance make these bearings particularly suited to ring slide applications. All bearings are lubricated for life internally and are available with metal shields for exclusion of particulates and low friction running or, with nitrile seals to inhibit ingress of liquids. Bearings are also available in stainless steel fitted with nitrile seals.


• Through hole fixing bearing (concentric) 34-35


* Through Hole fixing bearing (eccentric) 34-35 • Provides datum reference for the system. • Short fixing stud for thin carriage plate. • Long fixing stud for thick carriage plate.


• Controlled height option for enhanced system height accuracy. Provides simple means of adjusting via center hexagon or socket in stud. Eccentric adjustment sufficient to allow removal of the ring or carriage without disassembly.


* * * *


* Blind hole fixing bearing (concentric) 34-35


• For mounting into thick plates or where access to opposite side is • restricted.


• Provides datum reference for the system. Controlled height option for enhanced system height accuracy.


Blind hole fixing bearing (eccentric) 34-35


• For mounting into thick plates or where access to • opposite side is restricted.


• Adjustable from operating side for ease of access. Easily removed to allow removal of ring.


Controlled height option for enhanced system height • accuracy.


Floating bearing (concentric & eccentric) 36


• Axial float of outer race accommodates variation in system height. • Provides simple means of adjusting via center hexagon or socket in stud. • Short fixing stud for thin carriage plate. • Long fixing stud for thick carriage plate.


• Double eccentric version has sufficient adjustment to allow removal of the ring or carriage without disassembly.


*


Double Row Bearing / Twin Bearing 34-35 •


• Twin bearing for tolerance of misalignment and smooth running.


* Double row bearing for tolerance of debris and • higher load capacity.


Special raceway conformity and low radial • clearance, for slide ring applications.


* *


4 General quality to ISO Class 4. Aspects to Class 2.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64
Produced with Yudu - www.yudu.com