Track System Single Edge Curved Segments HepcoMotion track system single edge curved segments are used in single edge duplex track systems


17, 18 & 41. Segments


TRIS278 & TRES376 combine with TNSE track system single edges slides, and segments TRIM482 & TREM655 combine with TNME slides.


These segments are made to True Shape specification. All segment pairs in a system are matched in essential respects with each other and with their corresponding straight slides. Ends are ground square to a specific dimension. An additional fixing hole is provided at each end of the segment to give extra support at the join position. It is recommended that all single edge track system components are aligned to a machined register. Bishop-Wisecarver will supply suitable machined plates with precision registers, on request.


Segments are available gear cut, for mating with rack cut straight slides, to produce a gear driven track system.


All track system single edge curved segments are marked with a reference and sequence number for identification and replacement purposes


40 & 41. Segments of any angle can be supplied to cater for all track system configurations.


W1*1 R° F E H


Centerline of cut


AØ


MOD Gear size*1


External Single Edge Track Segment - TRE


For all other details and dimensions see 28-31 Part


Number TRIS 278


TRES 376


For use with


TNSE TNSE


A E ~


F H I ±0.025


261 20.8 21.37 12.25 10 351 20.8 21.37 12.25 10


TRIM 482 TNME 461.5 28.8 29.37 15.5 12.5 TREM 655 TNME 618.5 28.8 29.37 15.5 12.5


Notes:


1. Track system single edge segments with gear drive option Q or P will be ended to the root of a gear tooth. This will affect dimensions W1 and X1.


90 90 90 90


180 180 180 180


20 20 25 25


R° W1


X1 MOD*1 ±0.1


1.5 1.5


1 1


2.5 1.25 2.5 1.25


MOD Gear size*1


Internal Single Edge Track Segment - TRI


AØ


Centerline of cut


F E I


X1*1


I


R°


W1*1


X1*1


H


Ordering details:


Example: Part Number


R180 = 180° segment R90 = 90° segment


TRES 376 R90 (Q) (N)


N = Tapped hole option, 28-31 Q = Internal gear drive option


Available on TRE option only


P = External gear drive option Available on TRI option only


46


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64