Track System Double Edge Curved Segments


HepcoMotion double edge track system curved segments are cut from stock rings or segments. They are matched in essential respects with their corresponding track system straight slides and ground square on the ends to a specified dimension relative to their true shape. A clearance keyway and tapped hole facility is incorporated each end to provide a method of alignment when assembled together with the mating key of the track system straight slide*1. An additional fixing hole is provided adjacent to the keyway each end to give extra support at the join position for all segments except the TR12 93 & TR12 127. All track system curved segments are marked with a reference number and sequence number 40-41 and are available in stainless steel for applications requiring corrosion resistance. Segments to any number of degrees can be supplied to cater for all track system configurations.


W1 R°


Additional fixing hole (standard size)


X F E I W AØ


Centerline of cut


Z1


Socket Head Set Screw DIN 913 (supplied)


For all other details and dimensions see 26-27 Part


Number A E TR12 93


~ F H I ±0.025 Z Y1 X1 H Y


R° W W1 X X1 ±0.2


Y Y1 Z Z1 93 12 12.37 7.7 6.2 90 180 4.25 - 2.5 1.5 1.75 2 3.25 M2.5 x 3


TR12 127 127 12 12.37 7.7 6.2 90 180 4.25 - 2.5 1.5 1.75 2 3.25 M2.5 x 3 TR20 143 143 20 20.37 10 8 90 180 6 13 4 1.5 2 3.5 4.5 M3 x 4 TR20 210 210 20 20.37 10 8 90 180 6 15 4 1.5 2 3.5 4.5 M3 x 4 TR25 159 159 25 25.74 12.25 10 90 180 7 18 7 1.5 3 5 6.5 M4 x 4 TR25 255 255 25 25.74 12.25 10 90 180 7 20 7 1.5 3 5 6.5 M4 x 4 TR25 351 351 25 25.74 12.25 10 90 180 7 20 7 1.5 3 5 6.5 M4 x 4 TR44 468 468 44 44.74 15.5 12.5 90 180 8 25 10 2.5 4 6 7.5 M5 x 6 TR44 612 612 44 44.74 15.5 12.5 90 180 8 25 10 2.5 4 6 7.5 M5 x 6 TR76 799 799 76 76.74 24 19.5 90 180 10 30 18 2.5 6 7 11.5 M8 x 16 TR76 1033 1033 76 76.74 24 19.5 90 180 10 30 18 2.5 6 7 11.5 M8 x 16 TR76 1267 1267 76 76.74 24 19.5 90 180 10 30 18 2.5 6 7 11.5 M8 x 16 TR76 1501 1501 76 76.74 24 19.5 90 180 10 30 18 2.5 6 7 11.5 M8 x 16


Notes:


1. Some distortion may be present in segments in their free unmounted state. This may be overcome by bolting to the mounting surface and setting to adjacent slides using the keyway alignment facility 41. True Shape segments are available on request.


Ordering details: Example:


Part Number SS = Stainless Steel option


Leave blank for steel version 44 (SS) TR44 612 R90 (N)


N = Tapped hole option, 26-27 Leave blank if not required


R180 = 180° segment R90 = 90° segment


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64