Track System Double Edge Straight Slides


HepcoMotion track system straight slides are modified straight slides from the highly acclaimed HepcoMotion GV3 system for which there is a separate catalog, contact Bishop-Wisecarver or visit www.bwc.com. The slides are manufactured from quality high carbon steel, zone hardened on the V faces for maximum wear resistance and precision ground for high accuracy and conformity. The center portion of the slide is left soft to allow for customizing. Standard lengths are available up to 4020mm (1976mm in the TNMS 12 section) and unlimited lengths can be achieved by butting slides together. Slides are available in stainless steel for applications requiring corrosion resistance. Sets of short slides in incremental lengths can be supplied for customers wishing to extend a system in order to take up chain or belt stretch, see application example 19. A bleed lubrication facility is available to channel lubricant direct to the running surfaces 52.


B*1 C D C


Bleed Lubrication is available as a standard option


52. F E


Part Number


A A1*5 ~


B C D E (max)


0.0 -0.2


Ø x Depth


F


DIN912 (not supplied)


TNMS 12 12 12.37 1976 15 45 6 x 3 3.5 M3


G H H1 I


+0.05 0.00


±0.025 3 4 1.8 8.5 1.7


TNV 20 20 20.37 4020 30 90 8 x 4 4.5 M4 4.21 5 2 12 1.75 TNS 25 25 25.74 4020 30 90 10 x 5 5.5 M5 4.71 6 2.5 15 2.6


TNM 44 44 44.74 4020 30 90 11 x 6 7 M6 6.21 8 3 26 2.3 TNL 76 76 76.74 4020 30 180 20 x 12 14 M12 9.21 15 5 50 4.8


J


Notes:


1. Standard slide lengths are available in multiples of hole pitch 'D' + (2 x 'C') up to a maximum length per 'B' dimension in table above. Special length slides can be cut to order.


2. Adjustment keys are required at every join between straight slide and curved slide. Please order accordingly (see ordering details). Please note that 'Q' dimension for the TNMS 12 & TNV 20 slides is stepped one end to fit keyway 'H'.


3. Please note that dowel pins for the TNMS 12 slide are not stepped. 4. Slides in their free unmounted state are not necessarily straight. They should be set to the required straightness when bolting down to the mounting surface at assembly.


5. For track system requirements dimensions 'A1' and 'K' will be matched with corresponding dimensions 'F' and 'I', 42 44.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64