Assembled Double Edge Ring System


When using HepcoMotion Double Edge Ring Slides encircled by bearings as shown below it is recommended that two concentric bearings should be placed 120º apart in order to provide a datum reference. The other bearings should be the eccentric type. All eccentrics may be used where positional adjustment of the ring is required.


One or more lubricators may be fitted at convenient positions to take advantage of the increased load/life afforded by lubrication 55-57.


A 90° T S


Blind Hole Fixing Bearing (eccentric)


34-35 120° X


Drilling Center


Q


Outer position of eccentric bearing


34-35 L M N O P Q R


Drilling Positions*3 U


S T ±0.2 ±0.2


Pinion 53


R


Blind Hole Fixing Bearing (concentric)


34-35


FCC carriage 38-39


Bearing


(concentric) 34-35


U S 90° V


Bearings 34-36


Lubricator W 37


Ring slides 26-27


Lubricators 37


V ±0.2


W ±0.2


7.7 6.2 55 22 40 1.3 12.3 10.9 30 11.5 6.5 12 20.5 7.7 6.2 55 21 40 1.3 12.3 10.9 30 11.5 6.5 12 20.5 10 10


8 8


75 34 64 1.8 19 17.2 38 18 13 13 30.6 80 34 64 1.8 19 17.2 38 18 13 13 30.6


12.25 10 95 43 80 1.9 24.9 23.0 50 22.5 16 18 40.2 12.25 10 100 42 80 1.9 24.9 23.0 50 22.5 16 18 40.2 12.25 10 105 42 80 1.9 24.9 23.0 50 22.5 16 18 40.2 15.5 12.5 145 61 116 2.5 38.5 35.9 60 34.5 22 25 59.1 15.5 12.5 150 61 116 2.5 38.5 35.9 60 34.5 22 25 59.1 24 19.5 190 96 185 3.9 63.1 59.2 89.5 57 33 38 95.6 24 19.5 210 96 185 3.9 63.1 59.2 89.5 57 33 38 95.6 24 19.5 250 97 185 3.9 63.1 59.2 89.5 57 33 38 95.6 24 19.5 270 97 185 3.9 63.1 59.2 89.5 57 33 38 95.6


Ordering details: Example:


Simply list the components required and if relevant, bracket those you wish to be factory assembled.


Assembled {


1 x R25 159 R180 1 x FCC 25 159


180˚ Ring segment 26-27 Fixed center carriage 38-39


23


X


Pinions 53


XYZ ABC 123


Calculations 54-57


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64