Tech Specs Aico 0870 758 4000
l Loft cover meets F-Capped standard Aico’s latest addition to the Loftcap range, a compact cone version for use with smaller downlights, has been accredited with the F Capped standard and is
he only loft cover to obtain this standard. Loftcap was tested to BS EN 60598-1 and BS EN 60598-2-2 with 50 Watt dichroic lamps. No other loft cover has passed this test, making Loftcap truly unique. Made from inert mineral fibres and organic binders, Loftcaps are rot, corrosion and vermin resistant, non combustible, non-electrically conductive and maintenance free.
CP Electronics 0333 9000671
l Supporting customers all the way CP Electronics has published a brochure to highlight its OEM and Integrated products. It provides good technical advice on their range of detectors and accessories
that can be integrated into any lighting system. As well as producing a wide range of products for industrial and energy saving applications, CP provides a custom-built solution that takes on board functionality, cost, time and environmental impact. Low installation cost, ease of retrofitting to existing installations and quick payback are all key criteria.
Rittal 01709 704000
l Eplan Electric P8 v1.9 from Rittal EPLAN Service Pack 1 for electrical controls design software EPLAN Electric P8 v1.9 adds extensions in reports, schematic and master data creation, such as
intelligent PDF export, and consistency in the design and planning process. Project accelerator macros can be created in Eplan Electric P8 with up to 128 occurrences through the combination of variants and representation types. All the required occurrences of a partial circuit are managed in the macro file.
Relco 01933 271472
l GU10 LED lamp reduces energy usage The Relco Group has launched a new range of GU10 Mains Voltage LED Lamps, to provide the market with a high quality and energy efficient solution which avoids the
need to compromise on luminous efficacy, and helps to reduce carbon emissions. The range provides a direct replacement for the standard mains GU10 lamp and is fully supported by RELCO’s 5 year guarantee. The 4.6W LED GU10 version is comparable with a conventional 25W GU10 lamp, whilst the 5.8 Watt version is equivalent to the standard 40W GU10 lamp.
Buttkereit 0161 969 5418
l Flat cabling sealed and secured The latest icotek KEL cable entry systems from M Buttkereit Ltd are designed to secure and seal flat cabling passing through bulkhead apertures associated with
machine building or control panel assemblies. It comprises polyamide rigid frames, with two hole fixing, which can be supplied in sizes for a range of flat cables and round cables in the larger frames. Assembly time and costs can be saved with these products which are suited to cable assemblies incorporating large or moulded-on plugs and connectors.
Dimplex 01489 773336
l Dimplex air curtains help hit CRC targets With organisations looking to reduce energy consumption, Dimplex air curtains help by creating a stream of air that stops treated air from escaping through
open doors. Easy to retrofit, they offer recessed and surface- mounted models, or the units can be installed at the same time as the air conditioning or heating system, for an effective HVAC solution. They are supplied with a built-in Building Energy Management System (BEMS) interface and can be controlled via timers, presence detectors and temperature controls.
Harting 01604 827500
l Innovative Fast Track Switching technology The Ha-VIS FTS 3100s-A is the first switch of Harting’s Industrial Ethernet switches to offer their Fast Track Switching. It detects real-time automation frames and
uses the cut-through method to accelerate transmission. These frames are forwarded before other types, having the right of way over non-real-time frames. Incorporating 10 Fast Ethernet ports, it’s an unmanaged switch that can be configured with the FTS Manager via a USB interface, combining the handling of a ‘plug & play’ device with individual setting options.
Tyco 01799 520022
l MRJ21 Ultra Slim Gigabit Ethernet cabling system The MRJ21 Ultra Slim cable assembly is 9.14 mm in diameter, weighs 40% less than comparable four-pair cabling systems, occupies 45% less rack space, requires 25% less power per port, and promises to help to reduce data-centre operating costs. It’s a major development in the structured cabling marketplace, especially for data-
centre customers seeking to optimise space in the rack, on the floor, and cable pathways. Installation is six to ten times faster than four-pair cabling.
August 2010 • CABLEtalk29
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40