VP-211K 2x1 Video & Stereo Audio Standby Switcher
The VP-211K is a high-performance switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. When configured as a standby switcher, it switches to the secondary input upon loss of the primary input.
» High Bandwidth - 300MHz (-3dB). » Looping Input - Input 1. » Automatic Standby Switching - Switches from secondary input to primary input when a signal is detected.
» Control - Automatic or contact closure. » Kr-isp®
Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® enabled or disabled.
advanced sync processing can be
» Primary Input - Selectable. » Active Input LED Indicators.
VP-729 9-Input ProScale™
Presentation Scaler/Switcher
Kramer’s VP-729 is a 9-input scaler/switcher for analog and digital video, unbalanced stereo, and S/PDIF audio signals. It scales any video signal composite, s-Video (Y/C), component video (YUV), HDMI, computer graphics video and jpeg files) up or down to a selectable graphics or HDTV output resolution via HDMI or 15-pin HD outputs. It provides glitch-free switching between sources through FTB™
(fade-thru-black) switching technology. » HQV® Video Processing
» Fade-Thru-Black Switching » Picture-in-Picture / Picture-and-Picture » Universal Video Inputs - Each on 3 RCAs » HDTV Output - Up to 1080p » Computer Output - Up to 1920x1200 » Audio Inputs/Outputs - 4 (Stereo or S/PDIF) » Audio Delay -0-340msec » Embeds Audio on HDMI Outputs » Control - RS-232, IR & Ethernet
VP-200K 1:2 High Resolution UXGA DA
The VP-200K is a distribution amplifier for computer graphics signals up to and exceeding UXGA. The unit takes one input, provides correct buffering and isolation, and distributes the signal to two identical outputs.
» High Bandwidth - 400MHz (-3dB) » HDTV Compatible » ID Bit Control » Kr-isp®
Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® enabled or disabled
advanced sync processing can be
» EDID Support - The EDID data is passed to the source from the display connected to output 1
» Selectable Sync Input Impedance - 75Ω (video), 510Ω (Graphics/TTL).
» DC Coupling
www.iavi.com 888.999.6564
95
ACCESSORIES KRAMER
Distribution Amplifier: A device which distributes one video, audio, graphics or digital signal source to several acceptors for simultaneous recording, monitoring or processing.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108