FIXTURES - Display

SpanBar

Lightly Expressed® Light Bar

Primary Material: Beam Spread:

Max Arm Length: Max Lit Length: Max Leg Height:

Aluminum extrusion, Stainless Steel

Custom based on fiber angles, 3 rows of fiber, max angle from 0° is +/- 15° Not all rows must be used, fixture can have 1, 2 or 3 rows of fiber

Cannot exceed 72” or 250 fibers per leg (500 fibers for 2 legs), 300 for Direct out (600 for 2 Direct Out); whichever comes first

Lit length is determined by subtracting an end section allowance from the total arm length. The allowance is dependent on the leg configuration 24”

Elbow Dimensions: 1.130” (OD) x 1.980” (H) (29mm x 50mm) (with leg only) End Cap Dimensions: 1.140” (OD) x 0.630” (H) (29mm x 16mm) (for direct out) Fiber Type: Fiber Tail: Finishes:

0.75mm PMMA Fiber

10’, 20’ or 30’, custom lengths also available Clear satin or black anodized

Max Exp Rating: Mounting:

Indoor or damp use only. Please specify with order Mounts over 1.125” hole; mounting hardware included

Free-standing and modular with precision rotation delivering individual lightpoints without glare.

Length

01 No Legs 02 No Legs 1L One Leg 2L Two Legs

One Direct Out Two Direct Out

71.375” 70.750” 69.875” 69.000”

Max Lit

End Section

(1.5” Leg + 0.625” direct end)

0.625” 1.250” 2.125” 3.000”

Max Arm Length

72” 72” 72” 72”

Fiber Bundle

Max # of Fibers

L

300 600 250 500

E Isometric Key:

L Lit Length E End Section I Intensity H Leg Height T Tail Length

Trim

E Elbow

T

Fibers per Inch

Beam Spread

0-12 5° to +15° max

M

Combined total Max = 20 Fibers/inch

0-12 0°

5° to -15° max

Fixture can have 1, 2, or 3 rows of fiber. To leave out one row specify Fibers/Inch with 0 for that specific row.

SpanBar

Connection Type

No Legs,

One Direct Out

No Legs,

Two Direct Out

1L 2L

One Leg Two Legs

01 and 1L include end cap

Leg Length

specify 2” to 24”

Arm Length Tail Length

specify 1” to 72”

Arm length = Lit Length + End Section (see table)

specify 5’ to 30’

SP

01 02

T

Top Row

Intensity M

Middle Row

Finish Type B

Bottom Row

C B S

Specify both Fibers/Inch AND Beam Angle for all three rows

23

B

0-12

T max + 15° M std 0° B max -15°

End Cap

Ordering Guide

| ____- | ___________ - | _______ -| ______ - | ________- | ________________ - | ___________ - | _______

Type

Tail Exit

Clear Anodized Black Anodized Custom Finsih

L R D C

Left side Right side Dual Tail Custom

T

I H

INTENSITY

CONNECTION TYPE Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121