016_ea_Apex_0310_ES 10/03/2010 16:51 Page 19
PREVIEW 19
Vote out VOCs
Electro-chemical manufacturer, Electrolube, will be exhibiting
for the first time at Apex. A number of products will be
exhibited, including its non-VOC conformal coating range.
NVOC is a flexible, moisture cure, conformal coating based on
polyurethane technology for the protection of electronic
circuitry. Electrolube developed the range to match the
performance of solvent-based coatings with minimal changes
to processing parameters. It has been tested to recognised
standards and is said to be a viable alternative to many solvent
based conformal coatings.
Designed to meet environmental expectations, NVOC offers
green benefits while offering protection. It also adheres to a
variety of substrates and resists mould growth. The products
also boast greater coverage and less waste, with no expensive
curing equipment. The range includes a high viscosity gel and
aerosol version.
high humidity and salt-spray conditions.
Electrolube also plans to exhibit its DCA-FD modified silicone
conformal coating, which is touch dry in 20 minutes. Its DCA-FD has reduced VOC levels and is said to offer excellent
increased solid content gives 35 per cent greater coverage per adhesion and resistance to most solvents, lubricants and
litre compared to other products in the range, which results in chemicals. It is also resistant to mould growth and UV light
significant waste and cost saving per substrate. Fast-Dry DCA and can be sprayed, dipped or brushed.
has a wide operating temperature range and is suitable for
commercial and military applications, particularly in harsh, n www.electrolube.com Stand 2459
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28