DuraDeckLeisureBrochure:Layout 1 23/2/10 08:53 Page 1
DURA DECK Range Data
Dura Deck 295 x 23
(wide groove design on one
side fine grooves on reverse)
FIxings
*Dura Deck 260 x 24
Below Surface plastic hold down clips
(wide groove design on one
(vertical screw fixing) - 6 &10mm board gaps
side fine grooves on reverse)
Below Surface S/steel and plastic
Dura Deck 225 x 32 tamperproof hold down clips available
(timber effect design on one
side, fixings allow board
Start / Stop fixing for perimeter boards
removal and replacement)
End caps to seal board edges
*Dura Deck 190 x 26
(wide groove design on one
Adhesive to fix end caps
side fine grooves on reverse)
Colour coded 8 & 10g (316) wood screws
to suit Below Surface fixings
Dura Deck 146 x 21
(Narrow groove design on one
Optional non coloured 8g & 10g (316)
side and smooth on reverse)
wood screws to suit Below Surface fixings
* Profiles in development at time of going to press
Dura Deck Range
TECHNICAL INFORMATION
Dura Deck composite decking boards are
Plank Plank Plank Colour Max Span Weight / Lin.M
width (mm) thickness (mm) length (mm)
produced with a hollow core centre which
295 23 up to 3830 Teak 600 5.88 creates exceptional strength and lightness.
260 24 up to 4300 Teak 600 5.2 (est) Every board has a recess moulded into
225 32 up to 4000 Dark Teak 750 4.4
each edge which accepts a heavy duty
190 26 up to 4300 Teak 550 3.82 (est)
hold down clip, creating a Below Surface
155 27 up to 4300 Teak 500 3.25 (est)
secure fixing, using 8g and 10g stainless
146 21 up to 3830 Teak 400 2.94
steel colour coded screws. The result is a
Facia Infil Panel - (to hide decking supports and edge sealing etc.)
fully professional screw/nail free appear-
Width: 295mm Depth: 12mm Length: Up to 3830mm Colour: Teak
ance with full bare foot safety.
Surface: Sanded, Grooved on one side Smooth on reverse
Manufactured from polyethylene based
Material Specification
resins, reclaimed hardwood, and finished
with an attractive hardwearing anti-slip
Characteristics Unit Test Reference
finish. Dura Deck eliminates rot, algae
Tensile Strength 15mpa BS 6399
growth, discolouration and significantly
Impact Strengths 8Kj ASTM D1037 - 93
Flexural Strengths 3.15 Gpa ASTM D1037 - 93
reduces the risk of slipping in wet
Flexural Strength after UV ageing
conditions.
(1000 hrs & rain) 3.13 Gpa ASTM D1037 - 93
Dura Deck is manufactured from recycled
UV ageing test Pass ISO 4892 - 2 and sustainable materials, yet gives the
Density 1.4g/cm3 ISO 9001 appearance of traditional hardwood timber.
24 hour Water Absorption 1.07% ASTM D684
Due to its advanced material composition
Flammability Resistance Class 3 BS 476 Part 7
and unique design it is able to span up to
Anti-slip Surface 89 dry - 58 wet BS 4592 Pendulum Test
750mm, meeting most of today’s
Expansion Rate 3.882 x 10-5K ISO 9001
requirements set by architects,
Weatherability No Damage @ 100 cycles MOAT 22
designers and specifiers.
Frost Resistance No Damage DD CEN/TS 772-22:2006
Dura Deck Load & Deflection Data
Plank (mm) Span (mm) Concentrated Line UDL
Load Kg/m @ 1% Kg/m2 @ 1%
deflection deflection
295 600 287 2296
260 600 286 (est) 2788 (est)
225 750 298 (est) 2490 (est)
190 550 289 (est) 2312 (est)
155 500 288 (est) 2304 (est)
146 400 289 (est) 2312 (est)
Due to our policy of continued improvement, we reserve the right to amend specifications and prices at all times.
Official UAE Distributor Head Office
Advanced Fibreglass Industries Dura Composites Ltd.
P.O.Box 32278, Unit 14 Telford Road, Clacton-on-Sea,
Dubai - UAE Essex CO15 4LP, United Kingdom
Tel: +971 4 3403905 Tel: +44 (0) 1255 423601
Fax: +971 4 3403906 Fax: +44 (0) 1255 435426
www.duracomposites.ae www.duracomposites.com
Dura Deck Issue 2 - 03/10
afi@emirates.net.ae info@duracomposites.com
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8