Technical introduction
The introductory pages preceeding the DQS certificate:
various product groups and the product
The high quality standards in R & D, pro-
pages contain specific instructions for and
duction and sales are monitored by a quality
technical information on the relevant pro-
management system that complies with the
ducts. The following general information
tough requirements of DIN EN ISO 9001. ebm-
applies to the entire range of products.
papst Landshut has been certified by DQS since
1991.
Electromagnetic compatibility (EMC):
Product liability:
ebm-papst products are components
ebm-papst motors and blowers are
supplied to other industrial and trade companies
components the function of which is determined
with expert knowledge of electromagnetic com-
in the custo-mer’s unit. ebm-papst offers a war-
patibility.
ranty for the function of its products according
ebm-papst products are therefore not subject to
to EN 60335-1, EN 50178 and EN 60950, provi-
the Law on Electromagnetic Compatibility of
ded that the ebm-papst products are used cor-
Equipment. Compliance with the EMC Directive
rectly and that, during the development of the
must be assessed on the final product since dif-
customer´s product, ebm-papst made sure of
ferent EMC properties may be created when
this and issued a confirmation in writing as to
products interact with other components.
this effect.
ebm-papst AC motors meet the requirements
Only after the product has passed product-
of Low Voltage Directive and EMC Directive.
specific and application-specific tests agreed
Statutory limit values are being kept.
on between ebm-papst and the customer, can
ebm-papst motors are not safety-relevant com-
subsequent liability be assumed; this will be
ponents requiring an EMC test by an indepen-
done exclusively in accordance with relevant
dent institute. ebm-papst, therefore, does not
statutory regulations.
issue EMC test protocols.
Important Information: Fans and motors
For squirrel-cage induction motors and their
may only be used after installation and may
connection to mains voltages the “GUIDELINES
not be put into operation before being proper-
IN THE APPLICATION OF COUNCIL DIRECTIVE
ly installed. Installation has to be effected by
89/336/EEC OF 3 MAY 1989 ON THE APPROXI-
trained, briefed and qualified staff.
MATION OF THE LAWS OF THE MEMBER STATES
The information and images in this catalogue
RELATING TO EMC” apply.
are non-binding. We reserve the right to modify
Section 5.4, p.21ff states that compliance with
our products (deviation from images and techni-
the EMC regulations is generally assumed for
cal data provided herein) without prior notice in
induction motors (e.g. shaded pole motors and
writing.
capacitor motors).
6
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120