MICRO COMM VIDEO OVERLAY
The MVIDSYS-X is an overlay system that can add floor will require the 3 wire MICRO COMM link for the elevator
position and direction to any NTSC or PAL-B video signal information. This information can be gathered from an
for security and liability applications. If the information is existing MICRO COMM link in the car or can be
available on the link, the unit can also provide obtained by installing a driver in the machine room and
messages that are needed for elevator status. Installed bringing the data down to the car on the 3 wire serial
of the unit utilizes existing coax wiring to the monitor, but link to display floor position and elevator status.
6
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43