Order lines open 8.30am - 5.00pm Mon - Fri
LIGHTING
+44 (0) 1885 488 488
7” LIGHT UNITS FOR HALOGEN BULBS
LUCAS LIGHT UNITS LUCAS LIGHT UNIT CIBIE LIGHT UNITS CIBIE LIGHT UNIT
RHD - With domed lens, With flat lens for those of With domed lens, E marked With domed lens, E marked
rubber boot and sidelight you who prefer the For halogen bulb LLB472 The special feature of this
fitted. E marked. Dips to the appearance of a flat glass RHD - without sidelight. light unit is that the three
left. For halogen bulb lens, rubber boot and Dips to the left SD/010.272 adjusting screws are fitted
LLB472 SD/LUB383 sidelight fitted. E marked. £34.44 each | £29.95 ex VAT to the light unit, not the
£40.25 each | £35.00 ex VAT RHD–Dips to the left. For RHD–with sidelight fitted. backshell. As fitted to
RHD–Also available as a halogen bulb LLB472 Dips to the left SD/010.273 Morgans and others.
pair, complete with two 12V LUB385 £34.44 each | £29.95 ex VAT (Although not needed on a
halogen bulbs LLB472, two £43.85 each | £38.13 ex VAT LHD–With sidelight fitted. Morgan, there is provision
sidelight bulbs and dust Dips to the rightSD/010.275 for a sidelight) For halogen
covers SD/LUB801 £40.25 each | £35.00 ex VAT bulb LLB472
£89.13 pair | £77.50 ex VAT RHD-Dips left 010.274
LHD–as above. Dips to the £58.60 each | £50.96 ex VAT
right SD/LUB802
‘E’ MARKED
£89.13 pair | £77.50 ex VAT
LHD–as above, but without
HALOGEN HEADLAMP ASSEMBLY
sidelight. Dips to the right
Main and dip beams with sidelight, plastic backshell,
SD/LUB803
gasket and wiring harness. Fitted with 12V halogen bulb
£112.13 pair | £97.50 ex VAT
60/65 watts and 5 watt sidelight bulb.
RHD–Dips to the left 010.265 £72.93 each | £63.42 ex VAT
LHD–Dips to the right 010.266 £80.36 each | £69.88 ex VAT
7” HEADLAMP PARTS (3-ADJUSTER)
We suggest that before you select parts from this
page you determine whether your Lucas 7” lamps
are of the 3-adjuster or 2-adjuster type
WIDE GASKET SCREW KIT BACKSHELL ASSEMBLY STEEL BACKSHELL
For 3-adjuster headlamps. For 3-adjuster headlamps. Steel backshell complete For 3-adjuster headlamps.
Made of rubber, it fits Set of three trimmer screws, with chrome retaining rim, Just the backshell
between the backshell and washers, springs and plastic BPF bulbholder and wiring 54522954
the wing SD/554280 covers SD/60600614 harness, but without light £21.31 each | £18.53 ex VAT
£6.13 each | £5.33 ex VAT £12.65 each | £11.00 ex VAT unit SD/010.173
£45.43 each | £39.50 ex VAT
7” HEADLAMP PARTS (2-ADJUSTER)
STEEL BACKSHELL GASKETS SCREW KIT FOR 2-ADJUSTER HEADLAMPS
For 2-adjuster headlamps For 2-adjuster headlamps. Set of two trimmer screws and inserts plus the spring that
54522342 Rubber. Backshell to wing goes between the inner seating dish and the backshell.
£16.58 each | £14.42 ex VAT Narrow SD/54521488 Suitable for both steel and plastic backshells. When using
£5.75 each | £5.00 ex VAT the plastic backshell use the two supporting clips that come
Wide 54521487 in this kit. When using steel backshells you can throw the
£10.58 each | £9.20 ex VAT clips away! SD/60600427 £9.89 each | £8.60 ex VAT
6
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80