This page contains a Flash digital edition of a book.
PREVIEW MACH 2014 LINEAR MOTION


Many of Hepco’s leading products will be featured including the flagship GV3 Precision Linear Motion and Transmission System and DTS (driven track system). The PRT2 Precision Ring and Track System will demonstrate Hepco’s ability to manufacture complete 360° ring guide systems and continuous motion circuits of limitless size and variation. The company can manufacture complete rings of virtually any size. For the first time at a MACH show


visitors will see the PRT2 1-Track continuous motion system that gives designers complete freedom in 2D bearing track design.


It provides an


unprecedented choice of products for the creation of cost efficient, space saving and highly reliable automation.


HepcoMotion Stands 4567/4584 www.hepcomotion.com Enter 322


Rainford Precision has now taken orders for drills with diameters of 0.015, 0.025 and 0.030 mm. The latest range of Iwata Tool carbide drills will receive their debut with Rainford Precision being announced as the UK distributor for the range; the carbide drills are available from 0.008 mm to 0.100 mm diameter with flute lengths of 3xD, 6xD and 12xD. The comprehensive micro-machining range from Iwata Tool


includes centre drills with 120°, 90° and 60° inclusive angles that complement the drilling line. Additionally, Iwata Tool can supply drills to produce holes in


materials as hard as 75HRc steel. The innovative TOGLON hard drills are available in 3 ranges; the miniature hard series are short flute drills that start at a 0.1 mm minimum diameter. To support the manufacture of extremely small parts with


'micro' features, the Iwata Tool agreement gives Rainford Precision customers access to a range of single straight flute end mills from 0.008 mm to 0.100 mm with flute lengths of 2xD, 4xD and 6xD. The synergy between the micro drills and the end mills will enable the company to extensively support all customers working in the micro machining industry.


Rainford Precision www.rainfordprecision.com AIR FILTRATION AND DUST CONTROL


Air Cleaning Systems (acs) will exhibit equipment to reflect the two halves of the business with industrial air cleaners for coolant mist control and downdraught filter benches for dust control. With regard to its industrial air cleaners for coolant mist control, the range will be represented by model OMF1000. This air cleaner is a free-standing unit designed to connect directly to a machine tool via a non-leak duct system. By employing this system, customers can achieve energy savings through the


small motors that achieve maximum filtration capacity. Furthermore, the OMF1000 has an


automatic power down function after a pre-programmed time interval to ensure the unit only runs when it is needed. The maintenance costs are reduced as


the OMF range of air cleaners require no service contract, replacement gaskets, seals or service kits.


Air Cleaning Systems Stand 5245 www.acs-ltd.com


Stand 5219 Enter 323


HIGH PRECISION HONING Enter 325


Delapena will unveil the high precision vertical honing machine PrecisionHone (E3000S) and small bore machine EAS SpeedHone and launch its specialist oils and abrasives divisions. After significant investment the company now has a suite of six electronically-controlled honing machines, four of which will be demonstrated. These technically advanced machines employ Siemens’ digital HMI in their control systems to support precision and consistency. Designed for a wide range of applications, they are shipped worldwide for engineering in sectors from automotive to sport rifle manufacture. EAS SpeedHone is designed for small bores and has a wide rotation speed range of 250-2500 rpm. With quick and easy tool change, it is suitable for tool room and batch production work. In addition, Delapena will display CalibreHone (E2000S-


XL), a long bore precision honing machine designed to hone straight and tapered bores at lengths up to 800mm. It features a step-back, ‘back taper’ honing programme to produce a controlled taper in the bore over a specified angle and length.


Delapena www.delapena.co.uk 24 MARCH 2014 | FACTORY EQUIPMENT


Stands 5878/5974 Enter 326


/ FACTORYEQUIPMENT UK’S SMALLEST DRILLS


DEBURRING AND FINISHING


With manufacturers becoming more conscious of the importance of high quality surface finishes, Ellesco will have seven machines in operation to demonstrate productive solutions for deburring and finishing components of all types. The company will give a UK exhibition debut to the T&B Series 1000 from Timesavers. As specialists in wide belt abrasive


finishing and deburring, Timesavers will have three machines in operation on the Ellesco stand with the T&B Series 1000 undoubtedly set to attract attention from show visitors. This new arrival to the UK is


Timesavers first machine capable of processing sheet material on both sides in a single pass. The potential for this machine to improve cycle times, set- up times and reduce labour input is unsurpassed, says Ellesco.


Ellesco


Stand 4510 www.ellesco.co.uk


Enter 324


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56