TECHNOLOGY I MATERIALS
A further way to reduce weight lies in the use of plastic plates in the inter-pane space in combination with integrated, laminated plastics in the inner and outer pane of the insulation glazing. Graphics: ift Rosenheim
thick glass, is designed to deliver an Ug-value of 0.3 W/m2K. A questionable development, because this format once again brings us back to the starting problem. The quadruple pane is just as heavy as today’s conventional triple glass with standard format.
Thin glass in photovoltaics
In the solar energy sector too pre-stressed thin glass is already being used to reduce the weight of glass-glass modules.
© 2012 Angel Business Communications. Permission required.
The overview shows the varying surface weights of differently structured triple insulation glass. Graphics: ift Rosenheim
According to the manufacturers, the life cycle of these modules is clearly higher than those modules based on film laminates. In addition, due to the higher mechanical rigidness, we can forego the enclosing aluminium frame. As a result, the thin glass modules are also suitable for the increasingly significant building-integrated installation of photovoltaic elements.
Choosing a diffusion furnace supplier for your PV process isn’t easy ... but at Thermco Systems, we make peace of mind part of the specification...
• High Reliability and uptime • Full range of products form small R&D to full size production tools.
ThermcoSystems SpringGardens Washington,West Sussex RH203BS, UnitedKingdom
T. +44(0) 1903 891700 F. +44(0) 1903 893888 E.
info@tetreon.com W.
thermcosystems.com ADivision ofTetreonTechnologies Limited *process dependent Issue V 2012 I
www.solar-international.net 31
• Automation including back to back cell loading, cassette to cassette
• Load sizes of >400 cells • Throughput of 1600wafers / hour* • Worldwide service and support • 45years of thermal expersise
Innovation, Experience and Reliability
• Industrial computer control with advanced SPC analysis software. • Process guarantee on PV films:
- Pocl3 - BBr3 - Nitride for ARC
- Oxidation - Anneal
• Peace of mind with your decision
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40