Toolholding System The DAH Zero holder, offered as one of the com- ponents of the company’s Dihart Reamax TS Plug ’n’ Ream system, features an integrated runout adjustment that ensures optimal concentricity, leading to enhanced hole quality and extended tool life. When finishing costly parts with extremely high quality requirements, the precise concentric adjust- ment of the reamer with the machine tool spindle is of critical importance. This adjustable holder makes it possible to dial in
the spindle runout within 3 µm or less with a simple and quick adjustment. It takes the operator only a few seconds to dial in the adjustment screws in order to reach the required con- centricity. Once the desired adjustment is achieved, cutting heads, such as the Reamax TS, can be interchanged without disconnecting the holder from the spindle, therefore maintain- ing the concentricity of the assembly. Komet of America Inc. Ph: 847-923-2107
Company will showcase its new patent-pending Vortex strategy for high-speed area clearance that will be the major enhancement for the upcoming 2013 release of PowerMILL CAM software for high-speed and five-axis machining. This new strategy will also be added to the FeatureCAM software for feature- based programming and the PartMaker
system for Swiss-type lathes later this year. Vortex has been developed specifically to gain maximum benefit from solid
SMS Machine Tools Ltd.
32 Claireville Dr. • Rexdale, ON, M9W 5T9 Tel: 416-675-7300 • Fax: 416-675-6965
SMS Machine Outils Ltee
4200 Sere St. • Ville St. Laurent, PQ, H4T 1A6 Tel: 514-738-4361 • Fax: 514-738-4199