This page contains a Flash digital edition of a book.
MFG4 Preview


milling, turning and mill/turn, and grinding with assembly and CMM inspection. Smiths Machine LLC Ph: 205-469-0616 Web site: www.smithsmachine.com


Permanent Product Identification Photo etch is the preferred material for nameplates, con- trol panels, and bar codes in applications where service life expectations exceed 20 years for the part. Graphics are per- manently embedded in the aluminum with a photomechanical


Booth #2241


WORKHOLDING & POSITIONING COMPONENTS...


CALLING THEM A


TECHNOLOGY MIGHT BE A STRETCH.


process involving etching the plate. Bar-code labels meet UID requirements of MIL-STD-130 and will not fade, scratch, or delaminate. Typical exposures involved abrasion resistance, acid corrosion, heat resistance, salt spray erosion, and accel- erated light and weather resistance. Other specifications are available for accelerated oxygen aging, stain resistance, clean- ing resistance, low temperature resistance, thermal stock, and moisture resistance. Willington Nameplate Inc. Ph: 860-684-4281 Web site: www.wnpinc.com


Enhanced CMMs


Calling them a solution isn’t. A solution to a wide range of workholding and positioning problems, all designed to promote higher productivity through faster speeds and feeds and to extend the life of expensive jigs, fixtures, jaws and clamping mechanisms. Serrated, low-profile edge, straight serration and single-point grippers in a variety of shapes and sizes, in inch and true metric. As well as Swivots®


— a modular component


Fairlane Products, Inc. 33792 Doreka Drive Fraser, MI 48026 (586) 294-6100 FAX (586) 294-6822 800-548-2935 www.fairlaneproducts.com


workholding system that rotates, swivels and pivots for holding and positioning of irregular contour surfaces. Looking for a solution? Look to Fairlane Products.


The new Crysta-ApexS CMM offers new levels of performance and economy to the 1.7-µm class of CNC CMMs. With a maximum error of MPEE = (1.7+3L/1000) µm, the line of CMMs more than doubles the effective measuring range at a given measurement toler- ance as compared to typical CMMs in its class. Additionally, the drive features high-speed (maximum 519 mm/s) and high acceleration (maximum 2309 mm/s2


). These advances result in higher throughput


for greater productivity and lower total owning and operating costs. System supports a wide range of probes that offer in-


130 www.sme.org/manufacturingengineering | May 2012


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156
Produced with Yudu - www.yudu.com