This page contains a Flash digital edition of a book.
references


1. Campbell, J., “Entrainment Defects,” Materials Science and Technology, vol. 22, pp. 127-145 (2006).


2. Campbell, J., “Castings,” 2nd ed., 2003, Elsevier Butterworth-Heinemann, Oxford, UK (2003).


3. Akthar, S., Arnberg, L., Di Sabatino, M., Dispinar, D., Syvertsen, M., “ Equation Chapter 1 Section 1A Comparative Study of Porosity and Pore Morphology in a Directionally Solidified A356 Alloy,” IJMC, vol. 3, pp. 39-52 (2008).


4. Akthar, S., Timelli, G., Bonollo F., Arnberg L., Di Sabatino M., “A Comparative Study of Defects and Mechanical Properties in High Pressure Die Cast and Gravity Die Cast Aluminium Alloys,” Proceedings of the 4th International Conference High Tech Die Casting, pp. 1-19 (2008).


5. Akthar, S., Dispinar, D., Arnberg, L., Di Sabatino, M., “Effect of Hydrogen Content,


Melt Cleanliness and Solidification Conditions on Tensile Properties of A356 Alloy,” Int. J. Cast Met. Res., vol. 22, pp. 22-25 (2009).


6. S. Akthar: Interim report, NADIA Project, pp. 1-12 (2007).


7. Timelli, G., Bonollo, F., “Fluidity of Aluminium Die Castings Alloy,” Int. J. Cast.Met.Res., vol. 20, pp. 304- 311 (2007).


8. Di Sabatino, M., Arnberg, L., Rørvik, S. Prestmo, A., “The Influence of Oxide Inclusions on the Fluidity of Al-7 wt.%Si Alloy,” Mat. Sci. Eng. A, vol. 413-414, pp. 272-276 (2005).


9. Yang, X., Huang, X., Dia, X., Campbell, J., Tatler, J., “Numerical Modelling of


Entrainment of Oxide Film Defects in Filling of Aluminium Alloy Castings,” Int. J. Cast Met. Res., vol. 17, 321-331 (2004).


10. Caceres, C.H., Selling, B.I., “Casting Defects and Tensile Properties of an Al-Si-Mg Casting Alloy,” Mater. Sci. Eng. A, vol. 220, pp. 109-116 (1996).


11. Divandari, M., “Mechanisms of Bubble Damage in Castings,” PhD thesis, University of Birmingham (2001).


12. Zhu, J.D., Cockcroft, S.L., Maijer, D.M., Ding, R., “Simulation of Microporosity in A356 Aluminium Alloy Castings,” Int. J. Cast Met. Res., vol. 18, pp. 229-235 (2005).


13. Froescher, A., Moores, A., “Advances in the Determination of Hydrogen Concentrations in Aluminium Alloys,” Foundry Practice, vol. 245, pp. 16-20 (2006).


14. Moores, A., Froescher, A., Medosevic, F., “Foundry Experiences with a New Electrochemical Sensor for Determining Hydrogen Concentrations in Aluminium Alloys,” Foundry Practice, vol. 242, pp. 8-13 (2004).


15. Akthar, S., “Hydrogen Porosity in Al-Si Foundry Alloys,” PhD thesis, Norwegian


University of Science and Technology, Trondheim (2010).


16. Liu, L., Samuel, F.H., “Assessment of Melt Cleanliness in A356.2 Aluminium Casting Alloy Using the Porous Disc Filtration Apparatus Technique - Part I Inclusion Measurements,” J. Mater. Sci., vol. 32, pp. 5901-5925 (1997).


17. Dispinar, D., Campbell, J., “Supercooling of Metal in Fine Filters,” J. Mater. Sci., vol. 42, 10296-10298 (2007).


18. Liu, L., Samuel, F.H., “Effect of Inclusions on the Tensile Properties of Al-7% Si-0.35% Mg (A356.2) Aluminium Casting Alloy,” J. Mater. Sci., vol. 33, pp. 2269-2281 (1998).


19. Dispinar, D., Campbell, J., “Critical Assessment of Reduced Pressure Test. Part 1: Porosity Phenomena,” Int. J. Cast Met. Res., vol. 17, pp. 280-286 (2004).


20 Dispinar, D., Campbell J., “Porosity, Hydrogen and Bifilm Content in Al Alloy Castings,” Mat. Sci. Eng. A, vol. 528, pp. 3860-3865 (April 2011).


21. Campbell, J., “The Bifilm Concept: Prospects of Defect-Free Castings,” Proceedings; 68th World Foundry Congress, vol. 1, pp. 1-6 (2007).


22. Laslaz, G., Laty, P., “Gas Porosity and Metal Cleanliness in Aluminum Casting Alloys,” AFS Transactions, vol. 99, pp. 83-90 (1991).


50


International Journal of Metalcasting/Spring 2012


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91