WORKSHOP SUPPLEMENT
EMCO supplies a wide range ofworkshop equipment to the CORE
EMCOEducationUK has supplied awide variety of machines and equipment to the CORE. The CORE isDurham
County Council & SWDurham Training’s multi- million-pound advanced engineering and manufacturing centre at Newton Aycliffe. EMCOprovided five Emco
CNCmachines, two 3D Systems 3Dprinters – one prints in full colour, a hand held 3Dlaser scanner, an Epilog laser cutter,a Techno 3ft x 2ft router and the first Kern 2.5mx 1.3mmetal cutting laser in this country, aswell as fitting a completeworkshop and classroomarea. Originally, the centrewas
geared towards the needs of learnerswithin the 14–19 age range and qualifications such as theMPDDiploma, Applied GCSE, A level,NVQs levels 1 to 4, BTEC and apprenticeship delivery. Now, all learners, students,
and employees can benefit fromawhole of host of other
WORKSHOP – EMCO
Seen above is the training centre at EMCOin Salzburg,Austria,where customers are being trained for their new EMCOCNCmachines. This is a fine example of themodernworkshop
specialist qualifications and bespoke programmeswhich range frommechatronics to maintenance strategy and industrial skills. For the 14–19 year olds, the
which EMCOEducation UK is helping to create through this country. Light, clean, highly-efficient – a world away fromthe workshops of old.
CircleNo.E19
centre reproduces and simulates the real-life business ofmanufacturing across a range of sub-sectors.
CircleNo.E20 This newtable also
includes a lead-on pin for bearing guided curvedwork and a pin storage park. The 240vNoVolt release switch is supplied as standard and can be positioned to the front right or right hand side of the table. The CRT/MK3 has a quick
release fixing, extruded aluminiumback fencewith laminate-facedMDF sliding cheeks to reduce the aperture. This back fence has a 57.5mmdust spout aperture and a T-slot in the top to take future accessories. The CRT/MK3 is priced
from£199.00 excludingVAT, and is available fromTrend Routing Centres and stockists. For a copy of the new
2011/12 Trend catalogue, or to request further information and details of your nearest Trend stockist, please call 01923 249911 or visit theirwebsite at
www.trend-uk.com
A line of EMCOmachines at the CORE in CountyDurham. Technology & Science in EducationNo.188 January/February 2012 8 CircleNo.E21 2 Check out ourwebsite:
www.technology-in-education.co.uk
ATHOROUGHLY MODERN
router table
introduces a new
Trend
TRENDHAS LAUNCHEDa newversion of the Craftsman router
table.The CRT/MK3 has a laminated MDF table-topwith a removable aluminiuminsert platewith insert rings. This plate has a levelling
facility and can also be screwed to the tabletop for added security. The plate aperture has a diameter of 98mmto allowfor the largest panel-raiser cutters and is capable of accepting the Quick Raiser™ fitting kit for the Trend T11 router.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48