This page contains a Flash digital edition of a book.


LED Driver Controller from Diodes Handles More Demanding Lighting Applications


Costs under control D

y extending input voltage operation from 60V down to as low as 5.0V, the ZXLD1371 LED driver controller from Diodes Incorporated has been designed to handle as broad a range of applications as possible, including those subject to the greatest variance in input voltage,

lighting and 12VAC powered systems.

such as automotive Its ability to control an

istributed automation applications place wide- ranging demands on drive systems. Optimal solutions will, by necessity, be those that fulfil the functional and cost needs for a specific application. Available in a wide range of performance grades and with many upgrade options, SK 200E series frequency inverters from NORD DRIVESYSTEMS allow users to select customized solutions with features and costs that are tailored to their specific requirements.

The modular inverter series is

available in size 1 to 4 with a performance between 0.25 and 22 kW, cost-efficiently covering distributed applications ranging from simple control tasks to complex positioning.

Expansion options include external braking resistors and a separate 24 V power supply for stand-alone control voltage operation. .

Getriebebau NORD Tel.: +49 45 32 / 4 01 -0 Web:

enter 813

external driver FET in buck, boost and buck-boost driver topologies makes it an all-in-one solution, capable of driving as many as 20 high current LEDs in boost mode with a high level of accuracy.

Employing patent pending control loops and single resistor high-side current sensing, the ZXLD1371 will deliver a typical output current tolerance of 1%, helping to produce improvements in brightness control and lamp luminance matching.

dynamic range, through separate 20:1 DC dimming and 1000:1 PWM dimming options, resulting in higher accuracy light control particularly at lower brightness levels.

To further improve the reliability of LED lamp systems, the ZXLD1371 provides thermal management of LEDs via a dedicated external thermistor input, which combined with fault diagnostic outputs reporting LED load and driver status, helps to increase LED longevity. Switching at up to 1MHz, the TSSOP-16EP packaged LED driver controller will also help minimize circuit size by reducing the value of the external inductor.

The ZXLD1371 LED driver controller is priced at $1.30 USD in 1k quantities. Diodes Incorporated

Tel: +44 (0)161 622 4444

New LED Display Lighting from TT electronics Optek T

Web: enter 814 The LED driver controller offers users dimming over a wide

T electronics Optoelectronics Business Unit today announced

the OPA779 Series of display lighting for indoor illumination. The OPA779 delivers all of the benefits of LEDs – namely energy efficiency, longer life and light quality – in a unique tube assembly that makes it easy for manufacturers to make the leap from fluorescent to more energy- efficient LED based systems. Able to emit a uniform and consistent white lighting pattern within its length,

the OPA799 Series

provides exceptional lighting for retail display, architectural, under- counter, refrigeration, mobile food service, and point-of-sale displays.

“The OPA779 was designed through collaboration with our customers to produce a solid state lamp that not only provided the benefits of energy efficiency, but also met their needs for a low profile solution with excellent light quality,” said Roland Chapa, Product Line Director for TT electronics OPTEK Technology. “We supported those requirements by leveraging our expertise in optics, thermal management and electrical design. In addition, Optek has a proven track record with multi-chromatic tuning to generate a consistent and uniform white light that is critical for aesthetic applications.” The OPA779 Series delivers excellent light quality with a typical LED pitch of 1.5in, and a CCT of 5000K to 7000K. Total luminous flux, depending on device,

ranges from 40lm to 180lm, with a

maximum current drive range from 35mA to 175mA. Operating temperature ranges from 0°C to +70°C. The OPA779 series comes in two lengths, with the OPA779D-616 measuring 23.5 inches, and the

OPA779D-1169 measuring 46 inches. The OPA779D-616 and OPA779D-1169 solid-state lights can be used as a single unit or connected together in multiples to create scalable configurations. Optek will also build this product in custom lengths for unique applications.

TT electronics plc Tel: +44 (0) 1670 536749 Electronics MARCH 2012 Web: enter 815

Kontron AdvancedMC processor module AM4150

AM4150. Equipped with a 64bit Dual Core Freescale QorIQ P5020 CPU running at up to 2.2 GHz and high-speed fabrics, the new Kontron AM4150 offers outstanding performance on MicroTCA integrated platforms and as a daughter compute-intensive module board in ATCA platforms. The Kontron AdvancedMC processor module

K AM4150

incorporates the high-performance Freescale QorIQ P5020 dual core processor with cores based on the e5500 Power Architecture. With high-speed frame managers and multiple high-speed connections like Serial Rapid IO (1.3/2.1) and PCI Express, Kontron

requirements. To support maximum throughput and low latency, the Kontron AM4150 provides a fast dual-channel memory of up to 8 GB ECC DDR3 RAM.

Kontron Tel: +49 (8341) 803-0 Web:

enter 816 31

ontron announced today the introduction of its powerful

AdvancedMC processor module

the AM4150 meets highest processing

Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36