rEfErEncEs
1. Campbell, J., “Castings: The New Metallurgy of Cast Metals,” 2nd
ed., Elsevier, Oxford, UK (2004).
2. Sigworth, G.K., “Quality Issues in Aluminium Castings,” Fundamentals of Aluminium Metallurgy, Chapter 7, R.N. Lumley, ed., Woodhead Publishing, Cambridge, UK, pp. 155-182 (2010).
3. Davies, I.J., “Best Estimate of Weibull Modulus Obtained Using Linear Least Squares Analysis: An Improved Empirical Correction Factor,” J. Mat. Sci., 39 (4) pp. 1441-1444 (2004).
4. Jayatilaka, A., De, S., and Trustrum, K., “Statistical Approach to Brittle Fracture,” J. Mat. Sci., 12, pp.1426-1430 (1977).
5. Hertzberg, R.W., “Deformation and Fracture Mechanics of Engineering Materials,” 4th Wiley and Sons Inc., p.271 (1995).
ed., John
6. Surappa, M.K., Blank, E.W. and Jaquet, J.C., “Effect of Macro Porosity on the Strength and Ductility of Cast Al-7Si-0.3Mg Alloy,” Scripta Metall, 20, pp.1281-1286 (1986).
7. Cáceres, C.H., and Selling, B.I., “Casting Defects and the Tensile Properties of an Al-Si-Mg Alloy,” Mat. Sci. Eng. A, A220, pp.109-116 (1996)
8. Drouzy, M., Jacob, S., Richard, M., “Interpretation of Tensile Results by Means of a Quality Index,” AFS Int. Cast Met. J., vol. 5, pp. 43-50 (1980).
9. Cáceres, C.H., “A Rationale for the Quality Index of Al-Si-Mg Casting Alloys,” Int. J. Cast Met. Res., vol. 10, pp.293-299 (1998).
10. Cáceres, C.H., “A Phenomenological Approach to the Quality Index,” Int. J. Cast Met. Res., vol. 12, pp.367- 375 (2000).
11. Tiryakioğlu, M., Campbell, J., and Alexopoulos, N.D., “Quality Indices for Aluminum Alloy Castings: A Critical Review,” Met. And Mat. Trans. B, 40B, pp. 802-811 (2009).
12. Gunasegaram, D.R., Finnin, B.R., Polivka, F.B., “Effect of Flow Velocity on the Properties of High Pressure Diecast Al-Si Alloy,” Mat. Forum, vol.29, pp.190-195 (2005).
13. Gunasegaram, D.R., Finnin, B.R., Polivka, F.B., “Melt Flow Velocity in High Pressure Die Casting: It’s Effect on Microstructure and Mechanical Properties in an Al–Si Alloy,” Mat. Sci. Tech., vol. 23, #7., pp.847-856 (2007).
14. Lumley, R.N., O’Donnell, R.G., Gunasegaram, D.R., Givord, M., “Heat Treatment of High Pressure Diecasting Alloys,” International Patent Application PCT/2005/001909, WO2006/066314.
15. Lumley, R.N., and Schaffer, G.B., “Anomalous Pore Morphologies in Liquid Phase Sintered Al-Zn Alloys,” Met. and Mat. Trans. A, 30A, (6), pp.1682-1685 (1999).
16. Zak, H., and Tonn, B., “Melt Treatment, Grain Refinement and Modification 1: Effect of Alloying Elements on Iron-Containing Intermetallics in Al-Si- Mg-Cu 319 and 380 Alloys,” Conf. Proc. ICAA11, Aachen, Germany, pp. 279-284 (2008).
17. Wang, L., Makhlouf, M., and Apelian, D., “The Effect of A380 Alloy Chemistry on its Microstructure and Mechanical Properties,” AFS Trans. vol. 103, pp. 675- 681 (1995) (and references 1-5 therein)
18. Lumley, R.N. and Griffiths, J.R., “Fatigue and Fracture Resistance of Heat Treated Aluminium High Pressure Die-castings,” Conf. Proc. 112th Metalcasting Congress, NADCA, paper T08-042 (2008).
19. NADCA Product Specification Standards for Die Castings 6th
ed., NADCA publication 402, Standard A-3-2-06, NADCA, Wheeling, Illinois. (2006)
20. MatWeb Material Property Data, Online Materials Information Resource,
http://www.matweb.com/search/DataSheet.aspx?Mat GUID=5f92a8f7d6ad416c8ce9398cae14a363&ckck=1 Accessed Feb. 2010.
21. Kaufman, J.G., “Properties of Aluminum Alloys, Tensile, Creep, and Fatigue Data at High and Low Temperatures,” The Aluminum Association, ASM International, Ohio, USA, pp. 266-267 (2002).
22. Alcan Primary Foundry Alloys, Alcan Primary Metal Group, Alcan Aluminum Corp. Ingot Sales, p.64 (2002).
23. Makhlouf, M.M., Apelian, D., Wang, L. Microstructure and Properties of Aluminum Die Casting Alloys, NADCA Publication, #215, p.71 (2007)
24. Murray, M.T., “High Pressure Diecasting of Aluminium and it’s Alloys,” Fundamentals of Aluminium Metallurgy, Chapter 9, R.N. Lumley, ed., Woodhead Publishing, Cambridge, UK., p. 217-259. (2010).
25. Gallo, R., “Cleaner Aluminium Melts in Foundries: A Critical Review and Update,” AFS Trans., vol. 116, pp.195-220 (2008).
54
International Journal of Metalcasting/Summer 2011
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75