This page contains a Flash digital edition of a book.
Rebekah’s husband’s GNC protein powder came in these canisters, and she just couldn’t throw them away – they were too perfect for a fun project like this!


“Fabulous Finds,” “George and Basic Shapes,” and “Going Places” CARTRIDGES


Canisters range from 5 3/4 x 8 1/4” to 5 3/4 x 10 1/4” FABULOUS FINDS <bkplte16>(Jagged) at 5 1/4” (cut five);


GEORGE AND BASIC SHAPES <circle> at 4 1/2” (cut five); <oval1> at 6" (cut five); “A” and “A”(Shadow) (on page 92) at 1" (cut four); “B” and “B”(Shadow) (on page 93) at 1"; “C” and


“C”(Shadow) (on page 94) at 1" (cut three); “D” and “D”(Shadow) (on page 95) at 1" (cut two); “E” and “E”(Shadow) (on page 96) at 1" (cut three); “F” and “F”(Shadow) (on page 97) at 1"; “G” and


“G”(Shadow) (on page 98) at 1" (cut three); “H” and “H”(Shadow) (on page 99) at 1" (cut two); “I” and “I”(Shadow) (on page 100) at 1"; “L” and “L”(Shadow) (on page 103) at 1" (cut two); “N” and “N”(Shadow) (on page 105) at 1"; “O” and “O” (Shadow) (on page 106) at 1" (cut five); “P” and “P”(Shadow) (on page 107) at 1" (cut two); “R” and “R”(Shadow) (on page 109) at 1" (cut


six); “S” and “S”(Shadow) (on page 110) at 1" (cut four); “T” and “T”(Shadow) (on page 111) at 1"; “U” and “U”(Shadow) (on page


112) at 1" (cut four);“W” and “W”(Shadow) (on page 114) at 1" (cut two); GOING PLACES <forkknfe> at 2 1/2” (cut five)


55


KITCHEN CANISTERS by Rebekah Lane


Cardstock: Bazzill Basics (red, white), Die Cuts with a View (brown, tan); Patterned paper: Cosmo Cricket; Twine: Craft supply; Personal electronic cutting machine: Cricut by Provo Craft


1. Cut the shapes listed at left from your desired cardstock and/or patterned paper.


2. Thoroughly wash out your canisters. 3. Adhere the five <oval1> cuts behind the five <bkplte16>(Jagged) cuts and adhere one to each of the canisters.


4. Layer the letter cuts on their shadow cuts and adhere them across the <oval1> cuts.


5. Tie a piece of twine around each <forkknfe> cut and add them to the center of each <oval1> cut with foam adhesive.


6. Adhere the <circle> cuts to the tops of the canisters.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132