VMDensity V INCREASE YOUR NETWORK BANDWIDTH AND WATCH EFFICIENCY SOAR 21
Add Network Hardware The easiest solution is to install additional NICs in
your host server. The physical hardware only provides one or two integrated network ports on the motherboard and only has a limited number of expansion slots. All expansion slots could be in use, but you may still be able to increase the number of network ports installed in your server by using NICs that have multiple ports. For example, some PCI-X and PCI Express (PCIe) cards contain four separate network ports on a single card. Using these cards can quadruple the number of network ports installed in your server. Another option may be to take advantage of external
NICs. For example, if you run out of network ports on your host server, you could add one or more USB network adapters. USB-based network adapters, however, are not always ideal. Some virtualization platforms will not expose USB devices to VMs. Even if this is the case, you may still benefit by adding a USB network adapter. A best practice is to reserve a NIC for management
traffic. You can’t dedicate all of the available network bandwidth solely to VMs—there must be a way to communicate with the parent partition (machine) to manage it. Even if your virtualization software exposes a USB NIC to the VM, you may be able to dedicate a USB NIC to the parent partition. If you had previously dedicated one of the other NICs into your system to management traffic, then using a USB NIC instead will free that NIC for use with your VMs.
Share and Share Alike? It’s usually possible to share a single NIC among multiple VMs. The problem is that a single NIC provides a limited amount of network bandwidth, and bandwidth must be shared among all VMs bound to the NIC. But you can increase the available network bandwidth by installing faster NICs instead of increasing the quantity of NICs installed in your server. For example, switching to 10 Gigabit Ethernet can make the difference in virtual server performance.
Go Virtual If there isn’t a practical way to add additional
network bandwidth to your server, there is one more trick to try: decreasing the demands on your existing bandwidth instead of increasing the server’s total network bandwidth. One way to accomplish this is by creating a virtual
network segment, a network segment that exists solely within the host server. If you’re using Microsoft Hyper-V or VMware, there already is at least one virtual
network. Every physical network adapter used by a VM is connected to a virtual switch. That virtual switch is in turn connected to a virtual network adapter on each of the VMs that use the physical NIC. Virtual networks commonly provide VMs with connectivity to the physical network, but they don’t have to access the physical network. It’s possible to create a virtual network segment that services VMs, but doesn’t tie into the physical network. You could create such a segment to offload some of the network traffic from your physical network. For example, if you had a virtualized Web server that frequently used a back-end SQL Server database running on another virtual server, you could ensure that database queries don’t consume physical network bandwidth by creating a dedicated virtual network segment between the Web and database servers. By doing so, the network bandwidth available to your virtual servers is increased even without adding additional network ports.
Assess Your Servers Creating additional virtual network segments will
only help if you can offload a significant amount of network traffic to the virtual network segment. If this isn’t possible, by dedicating certain adapters to certain servers, you may still be able to take advantage of how your virtualization platform uses virtual switches for each physical network adapter. The idea is that some servers inevitably consume more
network bandwidth than others. Since you probably don’t have enough network ports to dedicate a port to every virtual server, you can decide how NICs should be shared based on each server’s bandwidth consumption. For example, if you have a SQL Server that consumes a lot of network bandwidth, then you could dedicate a NIC to it. Conversely, you may have domain controllers and a DHCP server that don’t use much bandwidth. As such, you could probably get away with sharing a single NIC among these servers. The availability of network bandwidth has the
potential to limit a host server’s overall VM density, but there are several ways to increase the amount of bandwidth available to the server and make more efficient use of your server’s existing bandwidth.
ABOUT THE AUTHOR: Brien M. Posey has received Microsoft’s Most Valuable Professional award six times for his work with Windows Server, IIS, file systems/storage and Exchange Server. He has served as CIO for a nationwide chain of hospitals and healthcare facilities and was once a network administrator for Fort Knox.
WWW.MOREDIRECT.COM
VOLUME 3 • ISSUE 2
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36