PMRExpo
Repeater coverage with a twist A
xell Wireless specializes in devices for extending the coverage of radio networks, and at PMRExpo it
showed a new TETRA repeater featuring the latest evolution of its software-defined radio technology. Tis adds frequency-shifting functionality to the basic repeater concept. “We have some quite exciting results from
rural area coverage tests done in various countries in Europe”, said Håkan Samuelsson, of Axell. “We’ve been able to extend the coverage of one existing base station up to the maximum distance of 57 km. Tat’s as far as TETRA goes, due to the time-slot timing issue. “With frequency-shifting technology, where
the input frequency and the output frequency are different, there is no risk of the repeater oscillating, which means that you can have the antennas – both the pick-up and the radiating antenna – rather close to each other. You don’t have to watch out for antenna isolation. “Tat also means that we can have a high-gain repeater with limited antenna isolation.”
Cost savings Needing no microwave links to connect it, and being much cheaper than a standard TETRA base station, the repeater offers an economical way of reaching shadow areas or remote locations such as offshore oil rigs – although it does so at the cost of robbing some traffic capacity from the base station which serves it. “It’s an interesting concept which, by the way, has been used in GSM networks for many,
many years”, Mr Samuelsson said. “It’s a proven technology and now we have for the first time introduced it into TETRA.” Te frequency shift, he explained, is executed
in software. “We use one channel in the TETRA band as backhaul. We take the base station signal and shift it to an unused channel, shoot that channel over to the remote site and convert it back to the original base station frequency. “Tere is a signal in the air in the allocated
frequency band, so the mobiles could pick it up and consider it to be a usable signal. But if they try to place a call, it’s on the wrong frequency! It doesn’t reach back to the base station. To avoid that, we did another trick: we actually invert the spectrum on that link, which we can do also with software – so you can say that the link frequency is scrambled to TETRA. We convert it back at the other end and it suddenly becomes a readable TETRA signal again.”
Slot by slot A subtle feature of Axell’s software-defined radio technology is that the TETRA time-slots can be manipulated individually. “For instance”, Mr Samuelsson continued, “if you have several repeaters around a base station feeding signals back to the base station, and on a certain channel there is no traffic, then the repeater is running noise back only. Te channel with a high-gain repeater becomes a little bit noisy. If you have several repeaters around the base station, the sensitivity of the base station goes down because all these repeaters are emitting noise.
“With this one, we can measure when one
single time slot in the channel is not in use and then we mute the repeater. Ten, if there is a mobile in the area of the repeater, the repeater opens up. And the action is so quick that no analogue ALC loop would be able to cope with that without over-swinging.”
Håkan Samuelsson displays Axell Wireless’s SDR-based repeater. One of its engineer- friendly features is that plugging a laptop into its USB port turns it into a spectrum analyser. “We can do all the installations without having any external test equipment along, because we turn the repeater into its own test equipment”, he said. “Software-defined radio certainly brings a lot of opportunities”
a German developer specializing in hardware and software products for public safety organizations. “This is a repeater developed especially for building complexes”, explained Michael Peil, of the company. “That is a major topic now in Germany, and we have now new rules. “If you build a new complex, you are
obliged to provide firemen and security with such a repeater. The firemen, they arrive at a building in an emergency case, so they don’t have the ability to communicate with people within the building. That’s why you are really obligated to provide them with such a repeater.” Existing buildings are exempted from this requirement. Nevertheless, Mr Peil
36
Direct-mode repeater for safer building complexes E
mergency radio coverage enhancement for buildings was offered by KaiTec,
expects that many building managers will want to install a system so as to remain on good terms with the fire brigade. “And
there’s not yet a lot of solutions like this”, he added. “Our relatively little company is very specialized in solutions like this.”
Stefan Kaiser, founder of KaiTec, introduces his company’s DMO 2020 Direct Mode in- building repeater for TETRA. New fire safety rules in Germany demand in-building coverage
TE TRA TODAY Issue 2 February - April 2011
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44