This book includes a plain text version that is designed for high accessibility. To use this version please follow this link.
THE INSIDE SCOOP
GREEN BUILDER RECOMMENDS
The best insulating choice is the one that respects your home’s design and orientation—along with your budget. For small retrofit jobs, pre-cut fiber glass batts are a quick and easy solution. To insulate an entire wood-framed home you can combine systems. For example, you might insulate the basement with rigid foam board, spray wet pack cellulose into the above-grade walls, and apply a hybrid spray-foam and fiber glass system to the cathedral ceiling. If you want to increase energy savings even further (and remove the roof ridge vent), fill the rafter cavities of the roof with expanding foam.


RIGID FOAM INSULATION


VIRTUES
> High R-value per inch
> Seals against air infiltration
> Good solution for basement walls


CAVEATS
> Some brands may shrink over time
> Producing synthetic foam is a resource-intensive process


RIGID FOAM WATER RESISTIVE
You may have seen contractors in your area putting green or blue insulation right over the wood siding of an old house. Chances are they’re applying extruded expanded polystyrene (XEPS) or polyisocyanurate closed cell foam. Both products are dense and durable. Some building experts suggest that foam used this way can an act as water resistive barriers (WRBs) negating the need for housewrap, but we recommend playing it safe and using housewrap as well. Rigid foam is also an excellent choice for insulating basement walls.


MINERAL WOOL NOTHING TO BURN
Although mineral wool looks like fiber glass, it’s made from basalt rock and slag, not glass. The resulting product, either batts or loose fill, is non-flammable, requiring no chemical flame retardants. As a result, off gassing emissions tend to be low. Mineral wool includes high levels of post-industrial recycled content waste (up to 90%), reducing the environmental impact of its production.


VIRTUES
> Fire resistant without chemical additives
> High in recycled content


CAVEATS
> Requires careful installation
> May need an additional air infiltration barrier


 


ECOBATT FROM KNAU
This fiber glass insulation has an unusual brownish color, in part because the manufacturer wants to highlight the fact that it does not use the usual petroleum-based chemicals found in most fiber glass. Instead, Knauf has replaced the usual phenol, formaldehyde, acrylics, and dyes with bio-based binders. As a result, the environmental impacts of creating EcoBatt’s binder agent have been reduced by as much as 70%. www.ecobatt.us


ICYNENE MD-R-200
Icynene’s most eco-friendly brand of spray foam includes 12.6% recycled plastic in the mix. The product uses water based blowing agents and no ozone-depleting HFCs or PBDEs (fire retardants). www.icynene.com


32
GreenBuilder 11.2010

Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78