This page contains a Flash digital edition of a book.
MARKET REPORT FLOOD DAMAGE RESTORATION


Latest products ArcGen Hilta increases BBA pumps line-up


ArcGen Hilta has been named by Dutch manufacturer, BBA, as principal UK supplier for a core range of its BA pumps, suitable for use in emergency situations or for contingency planning. They are offered in various configurations such as electric driven pumps and diesel motors. Because the multi-functional pump system has a vacuum assisted priming


pump, no forced cooling or extra lubrication is needed, and the equipment is suitable for clean and polluted water, sewage and discharge water. The pumps will discharge between 50-100m3


air capacity per hour and


soundproofed canopies minimise noise. The BA 100 and BA 150 are low-energy consumption pumps that can be


run on smaller diesel engines. Like the BA series, BA-C series models can run dry for longer periods and are designed for low maintenance. BA-C H high- pressure jet pumps are suitable for long distance or high head pumping. With a robust diesel motor pump set and a highly efficient centrifugal pump, BA-C H models are designed for reliability and easy operation. A mechanical float box provides a suction lift of up to 8m and can withstand pressures of up to 18 bar.


01902 790824 www.arcgenhilta.com Seddons’ Taskman washers give mobility


The Taskman Mini Bowser Washer, available from Seddons, is designed to offer speed and ease of use when tackling flood-damaged properties. The mobile unit has its own water source, making it suitable for use where mains water is not readily available. It is easily manoeuvred and has a protective wheeled frame. Suitable for heavy-duty usage, it has a Honda engine and a 125-litre water tank. The machine can deliver water pressure of 2250psi/150 bar, and water flow is 8 litres per minute. Fitted with an Interpump pump unit, it comes with a 10m high-pressure hose and a heavy-duty lance and trigger. 20m extendable hose kits are also available. There are 12 other models in the Taskman pressure washer


range suitable for the hire industry. These include Honda- powered petrol models from 1350-3000psi fitted with 2:1 reduction gearboxes and suction filter hoses, allowing use with a mains water supply or a reservoir source; heavy-duty Yanmar diesel Models of 3000psi/200 Bar; PTO washers and a 250-gallon water bowser and washer unit.


0845 230 4860 www.taskman-pressurewashers.co.uk


Climate Hire launches new dehumidifier


Climate Hire and Sales, the specialist cooling, heating and drying division of Hire Station, is launching a dual voltage rotary moulded dehumidifier. According to Director Matthews, “there are two specific markets in the UK regarding dehumidifiers. There is the flood restoration market, which demands a good rotary moulded casing with a condensate pump and hour clock. Then there is the building/construction industry where 110V is a requirement. Hire companies have always, therefore, had to stock different dehumidifiers to service both industries. “Our new FRD44 dehumidifier, which is manufactured for us in Italy, does away with these issues. It has a


rotary moulded casing, condensate pump, hour clock and dual voltage as standard.” 0845 600 4499 www.climatehire.co.uk


30


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44
Produced with Yudu - www.yudu.com