This page contains a Flash digital edition of a book.
Stokvis Boilers selected for second Bristol University site


An on-going programme of energy upgrades and planned replacement for properties belonging to the University of Bristol has demonstrated both the versatility and the economic viability of Stokvis Energy’s Econoflame boilers. Two years ago a pair of Econoflame 6000 Series boilers were installed by Mitie Engineering in the plant room supplying admin and teaching facilities, linked to the Social Sciences department, in the city’s Clifton district.


Interestingly in the case of the first contract, concerns about the gas pressure available from the mains led to the project team opting to de-rate the Stokvis boilers to avoid any risk of them cutting out at times of peak demand. Therefore instead of modulating from 76 up to 475 kW, the


two Econoflames were set to offer a range of 76-380 kW. Students resident in the converted Georgian townhouses served by the plant room, have enjoyed uninterrupted heating, as required, ever since the switchover was completed.


Andy Wigmore of Mitie Engineering comments: “The Social Sciences building was a challenging project but the Stokvis Econoflame boilers have performed well and we have a good working relationship with Stokvis.”


The Stokvis Econoflame range offers customers a selection of high performance premix boilers suitable for the whole spectrum of applications including schools, hospitals, hotels and commercial premises. They are also available in the form of pre- packaged plant rooms where the self-


contained module can feature a variety of other equipment including plate heat exchangers and pressurisation sets. Email: info@stokvisboilers.com www.stokvisboilers.com


Dimplex heat pump in PassivHaus supermarket


A Dimplex ground source heat pump is being used to supply domestic hot water to the first supermarket built to PassivHaus standards in the UK and Ireland, a Tesco store in Tramore, County Waterford.


PassivHaus buildings are designed to be extremely energy efficient – usually this means the annual energy consumption is under 15kWh/m2


. The building fabric


features high levels of air tightness and insulation to keep heat in, meaning only minimal space heating is required – and making the water heating an even more important consideration in the performance of the building.


The building’s hot water is provided by a heat pump system jointly designed by Dimplex and Dynamic Energy Solutions and installed by County Kildare-based Geothermal Solar. The system takes an unusual approach to meeting the store’s requirements; it uses a Dimplex SI 11 MEH ground source heat pump to draw heat directly from the water used in the building’s cooling system, efficiently


recycling the ‘waste heat’ from the chiller cabinets on the shop floor. The heat pump easily meets the total hot water requirement for the store, including the staff canteen and washrooms, and the customer washrooms.


Fergal McEntee of Dynamic explains: “We could have used a water source heat pump instead. However, a water source installation can be technically more complex, while the closed loop Dimplex ground source unit allows us great flexibility in the system design. Plus, we wanted to take advantage of the higher flow temperature that this unit gives – it’s ideal for meeting the supermarket’s hot water requirements.”


The Dimplex high temperature ground source heat pump can deliver flow temperatures of up to 70 degrees Celsius. At Tramore, where typical intake temperatures from the cooling system are around 25 - 28 degrees Celsius, the heat pump easily produces flow temperatures of 60 - 65 degrees Celsius – and a CoP of around 4.0 is typical under these quite


unique conditions.


More fresh thinking was demonstrated in the delivery of the heat pump system. In an approach that ticks all the boxes for modern methods of construction, minimising time spent on site and associated costs, a complete plantroom containing the heat pump was pre- assembled in the UK and shipped to Ireland, to be ‘plumbed in’ in situ, attached to the side of the supermarket building. However, this method also presented the Dynamic designers with an additional challenge to work around when it came to the sizing of the pipework, as it had to be able to accommodate all the adjustments to the system which may have been required to adjust performance once the heat pump was installed.


Fergal McEntee continues: “This application looks at the energy requirements for supermarkets and has opened the business community’s eyes to the possibilities for heat pumps, particularly with regard to using them to provide hot water. As a result of this installation, we are now talking to commercial clients in a wide variety of sectors.”


The supermarket incorporates a wide variety of other environmentally-friendly initiatives, including PV panels, a wind turbine, rainwater harvesting and infiltration permeable paving in the car park, the use of natural refrigerant gases in cooling systems, triple glazing throughout for insulation and roof-lights to allow use of natural daylight where possible. Tel: 01489 773336 Fax: 01489 773061 Email: marketing@dimplex.co.uk www.dimplex.co.uk


Building & Facilities Management – June 2010 energy solutions 9


HVRAC


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64
Produced with Yudu - www.yudu.com