Health & Safety
Image 4
particles have a tendency to stick to itself or nest, the
accumulation eventually builds a dust bridge. PowerCore is
engineered with computer-modelled fluid flow analysis to
manage the incoming dirty air and the velocities directed into the
filter pack, avoiding interstitial problems. In addition, the
PowerCore filter pack is only 178 mm deep, so there’s virtually
no opportunity for a dust bridge to develop."
PowerCore can be used in a wide range of dust collection
applications, from waste treatment and insulation material
production to the wood and food industry up to the use in
cement plants. Andreas Kiy: "The fact that six traditional fabric
filters can be replaced by one filter pack with the same
performance leaves a wide scope for the design of dust
collectors for flow rates from 1,360 to 34,000 m
3
/h. The
PowerCore dust collection system CPC as a stand-alone unit is
up to 50% smaller than conventional baghouse dust collectors.
The size of the silo dust collector CPV could be reduced by up to
70% compared to conventional systems and it is therefore also
suitable for the installation on conveyors and discharge
conveyors, mixers and agitators. Since the introduction of
PowerCore about a year ago, numerous units have already been
installed in Europe, which operate extremely successfully and not
only achieve the planned cost-reduction potential, but also
is eliminated is explained by Andreas Kiy, director industrial air surpass it in many cases. For the industry, the development of
filtration, Central and Eastern Europe: "Dust bridging occurs in PowerCore is the answer to the demand raised for decades: A
conventional baghouse dust collectors when the pulse-cleaning simpler and more service friendly maintenance of dust collectors.
pushes accumulated dust down the length of the filter, and often For more information contact Donaldson on tel: +49 2129 569 262
it accumulates in the lower interstitial spaces. If the dust or visit: www.donaldson.com
Convey Profitably Here
Replacement ropes
for all aeromechanical conveyors
• whatever the pitch
• whatever the disc diameter
• metric or imperial
Reliable Tube Chain Conveyors reduce your costs and are:
Economical to run - because low power usage
check
Segregation free- retaining your product quality
check
Economical to own – because of low maintenance
check
Able to start/stop full or empty - saving wastage
check
Safe to use - because can be rated to ATEX20
check
Your product is precious - keep it safe!
Cut your Costs Now
by calling Renby on:
01829 740913
e: info@renby.co.uk w:www.renby.co.uk
Schrage Rohrkettensystem GmbH www.schrage.de
+44 (0) 1457 865038 www.unitrak.co.uk
www.solidsandbulk.co.uk February 2010 Solids & Bulk Handling 49
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60