8 mAteriAls hAndling
Particle size analysis reduces cement manufacturing costs
Cement producers have found that switching from a conventional fineness measurement technique to laser diffraction particle size analysis provides more sensitive cement characterisation and better parameters for tuning product performance. Alain Blasco explains.
T
he scale of cement manufacture and its energy intensive nature are strong incentives for process improvement, to which the industry continues to respond. Tightening and/or automating process control is an important strategy for reducing waste and energy consumption, as is the use of replacement materials, such as fly ash or blast furnace slag, in the final product. The successful implementation of either approach demands detailed understanding and control of the factors influencing product performance. Cement performance is a function of composition and fineness (particle size). Composition is controlled by manipulating both the feed to the kilns and the reaction conditions, principally temperature. Milling circuits reduce the resulting clinker to fine cement. The traditional measure for fineness is Blaine number, but increasingly cement producers are switching to laser diffraction particle size measurement. Laser diffraction data correlate more sensitively with performance attributes such as strength and cure quality, and the technology is suitable for real-time measurement.
Blaine number is a surface area based parameter, quantified using an air permeability technique. It is very well-established within the cement industry but has limitations:
l Two cements with the same Blaine number may exhibit different performance characteristics.
l The measurement technology is predominantly manual and ill-suited to automation or the process environment. l Real-time analysis is not possible because measurement times are too long; l Accuracy reduces at higher values, for example for finer cements. Fig. 1 shows size distribution data for two samples with the same Blaine number. Particle size is an important parameter for cement because of its influence on the rate at which hydration reactions occur, when the product is mixed with water during use. These reactions dictate cement performance in the field. The two cements shown in Fig. 1 will exhibit marked differences in hydration behaviour, despite having the same Blaine number (4100), because of the relative amounts of fine and coarse particles. Generally speaking, cements with between 50 and 70 per cent of particles in the size range 2 to 32 microns have optimal properties.
Finer particles in this range give good early strength, larger ones enhance 28-day strength, and so different grades of product will be associated with finely tuned specifications within this range.
In cement production, major economic gains are being made by optimising milling, both of the cement and of replacement materials, using at- and on-line instruments. Fig. 2 shows a schematic of a typical finishing circuit used to reduce the particle size of the cement to meet the specification for a certain grade. The
Fig. 1.
Particle size distributions for two
samples with the same Blaine number (4100).
www.engineerlive.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36